Centroid Community CNC Support Forum

So I think I understand. 12 to 24 volt PS to take power to servo enable, I assume this has to be hot in order For the servo to work, Then set up each internal speed command for forward and reverse, running the 24 volts through the forward and reverse switch on the lathe. Of course run the 24 volts ...

Hey Guys, been away for a while, been a crazy busy summer and am just finishing building my sons house and starting on building mine.
I have had to put the cnc project on hold, but had purchased a no name AC servo for a spindle motor. Now I am still unable to continue just yet with the cnc ...

Yeah I understand, however leadshine in the us, for a comparable size starts at 600 and JMC doesnt have a US dealer. Im a little apprehensive about import taxes, I went to Ali and that size motor was about 250 + shipping and taxes, had everything written in chinese ( which I cant read),and had to ...

Does that mean it wont work, or I shouldnt use it?

I would agree with the 3 phase and vfd normally being cheaper, however not in this case. The link is to a servo motor with a controler and timing gears and belt for $444.00 that will bolt right up to my machine. I dont think I can beat that price, unless I buy the cheapest chinese motor I can find ...

Hey guys,
Im working on my latest project, converting my manual lathe to cnc. My first obstacle is what to use for a spindle motor.
Ive been looking at all the choices, 3 phase with vfd, AC servo, and this, https://www.servomotorkit.com/product-page/grizzly-g-1550-two-hp-servo-motor-upgrade.
This ...

Its been a longer than I thought project, but worth it. Building the control panel was more work than I realized but taking my time to make sure I had it straight in my head paid off. I have successfully cut test parts today, and aside from the typical plasma table issues they came out great. My ...

Well the new pc fixed the com errors, so now its on to calibrating my torch and hopefully cutting my first parts.
Thanks for all the help.
Jared

Yes sir, Joey I have gone through every step and the windows firewall is completely turned off. I ran the tuner, 3 times. Then I have gone and verified all the steps manually. The only step I haven't done is the last one in the tb 270 that is inconsistent according to tb 270.
There is absolutely ...

Once again I need some help, After sorting out all the setup for my motors/linear motion, I have everything working, home switches/home all,
laser, torch is firing, touchoff is working, ect.. I try to run a job and get communication errors. Doing a stress test over and over and trying different ...