Centroid Community CNC Support Forum

Also I have a rotary axis on the machine. the 02 motors on the x axis are connected together to a single terminal on the acorn board (hardware paired)

I have a gantry router with 02 clearpath motors on the x axis. for the clearpath homing setup I followed the instruction on TB319 documentation

Hi Keith,
thank you for taking time to consider my question. I'll answer your questions as best as I can.
E-stop contactor is wired to cut of ac voltage to the IPC5 power supply. In an e-stop event no ac voltage to the IPC5, hence no 75VDC output to the Clearpath. But there is 24VDC power to the ...

Clearpath motors can be configured to home each time they are enabled or only one time per power on. If the second option is selected and all motors are powered on at the same time, you could sequence the enabling so that the Z drive was enabled first to move the cutter up and away from the table ...