Centroid Community CNC Support Forum

Hi,

Generally I have found Intercon very good but I am finding that the contour feature in .dxf import is well.......just a bit rubbish! all the other dxf import tools work well and I have used them quite a bit. I need to cut an outside profile 40mm deep but the contour doesn't support multiple ...

I upgraded our Tryax BF4C with the Allin1DC. It is a great system. I am really pleased with the outcome. Just a pity we are now avoiding US suppliers due to the "hostile environment" the administration there has created.

Many thanks

Whilst what you say is strictly correct the pinout given is of no practical use as it only gives wire colours not their functions. It's only meaningful if you are using the Centroid probes and cables. I need to know which pins are for Tool height and touch probe signal lines plus +12V and ground so ...

Thank you that is helpful. I will investigate. Any guidance where I can find he probe header pin outs?

Many thanks for the reply.

The tool setter will hopefully be relatively easy as it will work with the sourcing setup on the probe output, but it is a NC contact i.e the opposite sense to the Centroid TT1. That is the circuit is broken when the tool is detected. Is it possible to invert the IO for ...

Hi,

I now have the basic retrofit of ALLin1DC to my bed mill completed and everything is working well. some good jobs completed.

The last part is to try to get the tool length and 3D touch probe going. I assume the probe functionality is unlocked on a Pro licence?

I have looked at the information ...

Many thanks,

I managed to get the information using DOS box as the CPU has suffered a total disk controller failure.

it confirms most of what I had worked out. How transferable are the PID settings?

Where do I get a copy of the file then? As I said this was a clean install in January so I would expect it just to work. If I update to the latest how do I keep all my settings?

Can anyone help with where to find the information on machine set up (turns per rev and spindle speeds) from an old CNC7 install?

I think I have everything about right on the replacement Allin1DC / CNC12 install but worth checking now I managed to recover the disk.

The total install is too big to ...