Centroid Community CNC Support Forum

I was finally able to service the machine. I ran the PC tuner, went through all of TB270 and TB309, and periodically ran stress tests. The stress tests failed every time. After completing the tech bulletins I restarted CNC12 and got the error in the attached image. So I shut down and restarted the p...

I thought I went through TB270 months ago when I initially installed the machine, but I've been chasing down other problems which I thought were related to this issue but ended up not being so. I'm actually servicing this machine for a third party so I don't have immediate access to all the relevant...

I believe so, if I understand your question correctly. I have separate power supplies for the auxiliary components switched by the Acorn relay module, so they are not sharing the 24v power feeding the board. I had thought that might be part of the issue, but it doesn't explain why it often freezes d...

We are having an issue with a 2 axis router randomly freezing while executing a G-code sequence. There is no consistency, but it seems to happen most often at the very beginning or very end of the G-code while executing several M60/M80 commands to turn on/off auxiliary outputs or during a homing seq...