Centroid Community CNC Support Forum

The expansion card is connected to the external power device and the jumper is set accordingly. There are instructions for that too. The instructions are missing the settings for the parameters. CNC12 operating instructions don't really help either. See image. Reading and understanding is not possib...

This is not the best nor the most logical way to measure tools. I prefer the method, tool spindle is empty reference. Each tool is now longer than the reference and a plus value. This has the advantage that you can check the length of each tool with a depth gauge. This method works in CNC12 and also...

I added a Plcadd1616 board to my OAK. There is nothing about configuration in the installation instructions. Where can I find information about this? Thanks.

Can you display the input voltage of spindle load meter in CNC 12? I probably have the problem that the vfd doesn't output the voltage for the load 1 to 1. At 1.5A on the Vfd only a voltage of 0.45V is output. 8A would be continuous load and 8-10A would be yellow or actually red because only a maxim...

7.1V yellow
9v red

Report

the centroid axis load meters do currently change color from green, yellow to red. and yes we can add a number display to the meter and filter it so its not jumping around alot so you can read it and make it optional to display or not since some users will not want this etc.. So for me the color of...

TWCS can only be used for head-table machines or also for table-table machines?
I would like to use it for my 4 axis machine with Trunnion. If it works, which software license do you need?

thanks.

I bought a PLCADD1616 card. I am missing the spacers to mount the card on the OAK. Do the spacers have UNC 6/32 threads?