Centroid Community CNC Support Forum

Thanks, that's exactly what I mean. In an emergency I will switch to the old-fashioned resolution so that cnc12 is displayed in full screen.

Theory and practice are two different things. I work with reference tool. I can check my measured length of the tool. This also gives me the opportunity to measure my tools using a tool presetter. Then the errors in the software (and PLC) remain as they are. It's a bit sad when you have to use an ex...

how can I get Cnc12 to do this in 1920*1080 format?

I don't need vcp. Parameter 219=0

solved

The laser is permanently installed on the table. A reference is needed because I don't want a fictitious measurement value, but rather a verifiable one. Each of the possible methods starts from an origin. In my case the origin is the empty tool spindle. Each tool is longer than the empty tool spindl...

reference tool Height offset = 0

I have programmed aux1 in the plc, when pressing aux1 the LED changes state but the output is not activated. I can switch the output with m10 via mdi. I also swapped the worklight with the clamp as a test, and the output for the worklight was then activated with aux1.

That's why I also have a wired handwheel. Wireless handwheel is not safety compliant. I could still imagine it with a Linux system, but definitely not with Windows 10/11!

Emergency stop at MpgAux In1 and +5v. NC switching of the emergency stop. PLC programming is above.

M10 and M11 work via mdi. Now I want to activate M10 via Aux1 of the jog panel. I tried with parameter 188 and value 1011, without success. Now I'm thinking about programming it in the PLC. I think something is still missing.