Search found 21 matches

by cncjenna
Tue Jun 13, 2023 9:41 am
Forum: Public Beta CNC Software Testing, Discussion and Feedback
Topic: CNC12 v5.0+ Draft Operator's Manual Mill/Lathe
Replies: 31
Views: 22071

Re: CNC12 v5.0+ Draft Operator's Manual Mill/Lathe

Reading the new manual.... Boo-boo on page 51. The F button descriptions do not correlate to the screen example. Actually the F1 is correct but then the rest of the button descriptions are off by 2...ie F2 is really F4, F3 is F5 etc. Thank you for pointing this out! It has been fixed on our end and...
by cncjenna
Tue Jun 13, 2023 9:29 am
Forum: Public Beta CNC Software Testing, Discussion and Feedback
Topic: CNC12 v5.0+ Draft Operator's Manual Mill/Lathe
Replies: 31
Views: 22071

Re: CNC12 v5.0+ Draft Operator's Manual Mill/Lathe

suntravel wrote: Fri Jun 09, 2023 2:49 pm After testing V5.04 on my lathe and a short conversation with Keith and Chris, Paramater 458 is missing in the Lathe Manual.

Must be set to 1 to keep C-Axis on outside a job for manual jogging and display on the DRO.

Uwe
Thanks Uwe, Chris let me know about this and it has been fixed on our end.
by cncjenna
Fri Jun 09, 2023 2:32 pm
Forum: Centroid Acorn CNC Controller
Topic: U tube videos by centroid
Replies: 14
Views: 1298

Re: U tube videos by centroid

midy wrote: Tue Jun 06, 2023 12:29 pm its still not right Keith, look at page 60, it's back to OD tools
Hi Midy,
This error has been corrected in the manual on our end, and will be seen with the next draft manual release. Thank you for the feedback!
by cncjenna
Fri Jun 09, 2023 9:08 am
Forum: Public Beta CNC Software Testing, Discussion and Feedback
Topic: CNC12 v5.0+ Draft Operator's Manual Mill/Lathe
Replies: 31
Views: 22071

Re: CNC12 v5.0+ Draft Operator's Manual Mill/Lathe

Mill Page57 screenshot from lathe New Laser Setup is nice Both Intercon - good job on the graph screenshots better visible now New Introduction to Centroid CNC Macros - top New chapters in Configuration - top, good idea to have most everything in the manual and not lots of extra files Machine Param...
by cncjenna
Wed Jun 07, 2023 3:58 pm
Forum: Public Beta CNC Software Testing, Discussion and Feedback
Topic: CNC12 v5.0+ Draft Operator's Manual Mill/Lathe
Replies: 31
Views: 22071

Re: CNC12 v5.0+ Draft Operator's Manual Mill/Lathe

As of today, a new draft version of the manual has been uploaded to our existing link. Please go and check it out to see the changes that have been made.
by cncjenna
Wed Jun 07, 2023 3:58 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: CNC12 v5.0+ Draft Operator's Manual Mill/Lathe
Replies: 2
Views: 563

Re: CNC12 v5.0+ Draft Operator's Manual Mill/Lathe

As of today, a new draft version of the manual has been uploaded to our existing link. Please go and check it out to see the changes that have been made.
by cncjenna
Wed Jun 07, 2023 3:58 pm
Forum: Centroid Acorn CNC Controller
Topic: CNC12 v5.0+ Draft Operator's Manual Mill/Lathe
Replies: 2
Views: 377

Re: CNC12 v5.0+ Draft Operator's Manual Mill/Lathe

As of today, a new draft version of the manual has been uploaded to our existing link. Please go and check it out to see the changes that have been made.
by cncjenna
Mon Jun 05, 2023 9:56 am
Forum: Public Beta CNC Software Testing, Discussion and Feedback
Topic: CNC12 v5.0+ Draft Operator's Manual Mill/Lathe
Replies: 31
Views: 22071

Re: CNC12 v5.0+ Draft Operator's Manual Mill/Lathe

suntravel wrote: Fri Jun 02, 2023 12:05 am Mill manual Page153

Convert / Create could be removed

screenshots are not good readable if manual is viewed on screen, could be improved, I used Nik Detail Extractor in Photoshop for the examples.

Uwe
Looking into fixing the screenshots now as well as the missing parameters
by cncjenna
Mon Jun 05, 2023 9:55 am
Forum: Public Beta CNC Software Testing, Discussion and Feedback
Topic: CNC12 v5.0+ Draft Operator's Manual Mill/Lathe
Replies: 31
Views: 22071

Re: CNC12 v5.0+ Draft Operator's Manual Mill/Lathe

Both manuals, section "1.10 How to unlock software features or unlock your Control" This is no longer how software unlocks work. Needs to be replaced with a description of how to import a license file. A new tutorial/guide has been added to our most recent draft release of the manuals. Th...
by cncjenna
Mon Jun 05, 2023 9:45 am
Forum: Public Beta CNC Software Testing, Discussion and Feedback
Topic: CNC12 v5.0+ Draft Operator's Manual Mill/Lathe
Replies: 31
Views: 22071

Re: CNC12 v5.0+ Draft Operator's Manual Mill/Lathe

In the M&G code table, and the chapter 13 descriptions, the manual should not imply that M30 is special or unique to Intercon. It is widely used as an "end of program" code. Once, its function was to rewind the spool of tape containing the CNC program. Centroid controls have never nee...