Centroid Community CNC Support Forum

To help solve this issue we'll need a bit more information on what's happening. Posting a report, as cncsnw said, through the F7 utility menu would be the quickest effective way of getting that information. A few immediate questions that occur to me are: Which axis specifically is not functioning? W...

The dip switches are in the middle of the end of the board, the end opposite of the fibers and the relays. If you're opening up the M15 from the LCD side, it should be on your left.

Sending a report to Centroid is the best starting place. Following that one thing I'm curious to is what's going on under the hood when you try to start it up. On one of the attempts where it doesn't start, does the CPU fan kick on? Does the motherboard show signs of life? Is the PSU turning on? If ...

Unfortunately with LED1 out the problem is most likely with the board itself. I'd recommend sending in a report and contacting tech support for an RMA.

How do the other LEDs behave around the PLC LED? Are you getting just the 4 power LEDs (3.3, 5, 12, -12) and no other lights?

Post a freshreport.zip so we can take a look at your VCP skin The format is a little different for the Allin1 VCP, but page 28 of the manual under "VCP Auxiliary Keys and Macro Assignments" should have what you're looking for. There are 16 auxiliary key slots in total and you're currently...