Centroid Community CNC Support Forum

You have installed a PLC program for some type of turret (nominally an 8-position Centroid-supplied Taiwanese turret which uses an electric motor for rotation, and which automatically unlocks as the motor drives forward, and automatically locks as the motor drives in reverse). However, you have no ...

I retrofit this m.c and did following 1) make turret uni direction 2) short all 12 switch to active slow solenoid 3)in that way only 13 input used but turret used only in one direction Sorry, new man on forum :) Dear aamir, My program and turret working perfectly with original equipment without any...

Dear aamir, My program and turret working perfectly with original equipment without any hardware changes. With two speeds. There are somewhere in hidden PLC source added some secret functions which required this "input #32" for tool changing (M6). And it is funny that this input I use for ...

Hi guys, I'm new on centroid so I hope that my problem is simple and easy to fix. I'm retrofitting Fanuc 6T lathe with hydraulic turret. Using OAK PLC with customized „Centroid_Standard-Lathe-OAK-8-tool_electric_atc-R1.src“. Tool changer do Indexing correct. But when I run example T0200 M6 it make a...

Attached report file.

Hi guys, I'm new on centroid so I hope that my problem is simple and easy to fix. I'm retrofitting Fanuc 6T lathe with hydraulic turret. Using OAK PLC with customized „Centroid_Standard-Lathe-OAK-8-tool_electric_atc-R1.src“. Tool changer do Indexing correct. But when I run example T0200 M6 it make a...