Centroid Community CNC Support Forum

What I see happening without a float switch is 2 things. If the torch tip or the material builds up with dirt the torch starts feeding down in Z if it doesn't find the material it just keeps feeding down in Z bending thin metal. even though the travel limit has been passed it still keeps feeding dow...

Here it is, Im not sure of the exact block because it was cutting. I was having a bunch of trouble with the conductive touch off failing, only worked about 90% of the time. so I had to do a dry run to find the correct spot to restart. if the cunductive touch off fails the z axis ignores the travel l...

Yes with the same program. Pretty much the first job I tried to cut other than some of the test parts. I finely got it to run all the way through, but made sure I didn't change screens between Graphics and G Code.

This happened twice yesterday, on a restart search, when I changed from the graphic screen to G code screen.
Thanks in advance for your help.