Centroid Community CNC Support Forum

Thanks, guys. I have the Huanyang HY02D223B, which IPGregory kindly linked the manual to. I bought the VFD and 2.2Kw spindle as a package deal on Amazon. Nothing special or odd about it as far as I know. It is a real Huanyang. Has the potentiometer on the front and came in a box with the HY logos an...

Can anyone confirm whether or not there must be a jumper between P and Pr (labeled P+ and PR on my VFD) as shown in the attached diagram? The VFD manual states those connections are for a braking resistor which I will not be using. Thanks.

Thanks, cnckeith.

Quick question: For the Spin Forward/Spin Reverse/VFD Reset/VFD Common connections between the VFD and relay board, is it OK to use 22-gauge wire, or I should I step up to 18ga? I have a 500-foot roll of 22/4 shielded wire that I'd like to use if I can. I have no idea what kind of current/voltage ar...

CNCKeith: The link to your "wire like this" doesn't work. Is there anything different or additional to what Marty does in the video? Thank you. fixed https://www.centroidcnc.com/dealersupport/schematics/uploads/S14984.r3.pdf Just making sure I'm reading this correctly. There is a jumper b...

I was able to successfully perform the spindle bench test. Ran into a small hiccup where the test program kept erroring that the voltage I was seeing was too low. Told me to check that max spindle speed was not above 3000 rpm. Turns out the latest CNC12 available, v5.08, installs with a default spin...

Thanks for the tip on the VFD cable. I bought a premade16gauge double shielded cable from eDealers Direct Automation on EBay. This one: https://www.ebay.com/itm/144247023611?itmmeta=01HQPRCXS589S9R6335ZW12CT2&hash=item2195cae7fb:g:RZEAAOSwOuRhaFOa Bought a 25-foot version and will cut it to len...

Thanks for the tip on the VFD cable. I bought a premade16gauge double shielded cable from eDealers Direct Automation on EBay. This one: https://www.ebay.com/itm/144247023611?itmmeta=01HQPRCXS589S9R6335ZW12CT2&hash=item2195cae7fb:g:RZEAAOSwOuRhaFOa Bought a 25-foot version and will cut it to leng...

Thanks very much, ShawnM and cnckeith. This is more complicated than I thought. I can absolutely follow that wiring diagram, no problem, but I never would've figured it out by myself, so I'm very glad I asked! I'll need to run more wires between my Power/VFD cabinet and my Acorn/Driver cabinet. They...

CNCKeith: The link to your "wire like this" doesn't work. Is there anything different or additional to what Marty does in the video? Thank you.