Centroid Community CNC Support Forum

Thank you for your help!

Attached is a fresh report, thanks!

Shawn I have read the manual thats why I'm coming here for help, I load the material in the prifile manager prior to the cut, in fact I have tried to load the profile and then load the g code then cut, load the g code, open progfiel manager and load the material, then cut, with each time having the ...

I thought the same thing however there is no command feedrate in the code. It doesnt matter what I run, including the hook program that came with the centroid software, they all cut at 80IPM. If I do put a feedrate in the G1, G2 or G3 then it will cut at the speed I specify however the next M61 with...

Started making my first cuts and I noticed that no matter what profile I choose in the profile manager the cutting speed is 80 IPM. I am using sheet cam for the post processor but I have ran the "hook" program that came with the centroid software and have the same issue. I do not have the ...

Set it up and it works perfect, thanks!

Im not using the THC board so the acorn has no way of knowing when the arc is established. Im holding off getting the THC board until there is an OK to use it with the Thermal Dynamics plasma

I have recently completed my very first Acorn retrofit on a my 5x10 Viacom plasma table. I am using a Thermal Dynamics 60i plasma power supply with a SL100 torch. I have added the Z axiz control however I have not gotten the THC board yet (waiting to see the outcome of compatability with the Thermal...