Centroid Community CNC Support Forum

Hi ekbiker,

The WMPG-6 connects to the CNC PC via a USB receiver, so the encoder ports are unused on the AcornSix with the wireless pendant.

Hi Daniel, The Acorn system ID is based off the Beaglebone board as well as the Acorn board, when you replaced the beaglebone it changed the system ID shown in the bottom right hand side of the screenshot you attached. You'll need to generate a new Report.zip and email it to diysales@centroidcnc.com...

Hi, A few questions, has the WMPG-4 worked before and your issue just started recently or is this a new WMPG-4? Have you tried moving the USB Receiver to another USB port on your PC and then rebooting your PC? Also as a rule of thumb, you should post a fresh report.zip file since it provides us with...

Hi Nick, Welcome to the forums. Looks like Uwe made a build with the same Stepper Motor and Driver, you can find his thread here . You can find our schematics here , just search for "Acorn," it looks like we have a schematic for the CL87Y but not the CL86T and I'm not sure of the differenc...

Thanks for posting your report. Have you had a look at this post? https://centroidcncforum.com/viewtopic.php?p=8855 Or TB270? https://www.centroidcnc.com/dealersupport/tech_bulletins/uploads/270.pdf It's possible a Windows update reset your firewall settings or turned Windows Defender back on, so I ...

Hi Nate,

You would have to purchase a 0.1 mfd capacitor online or from a local store that has them in stock. You can see the post from tblough for a little more information. https://centroidcncforum.com/viewtopic.php?p=33608#p33606

Gary's solution is great and from a KISS standpoint is the best method. However, if you would like to add a button in CNC12 to show the On Screen Keyboard, you can check out this post on editing the cnccams.txt file: https://centroidcncforum.com/viewtopic.php?f=61&t=3967&p=31680&hilit=cn...

Yeah, I wish these VFD manufacturers would use the same labels, it makes it tough to cross-reference sometimes. Maybe someone else who has used one of these WEG units previously will chime in. Chuck should be back soon to give us some guidance on this one.

Good idea using OneDrive to sync your files. The best way to handle this would be to copy the files out of OneDrive on your CNCPC into a 'working' directory, like C:\JobFiles\. I understand that this is an extra step you were hoping to avoid but it's better than the job file changing as you're runni...

Hey Guys, there's more information available on this page: https://www.centroidcnc.com/centroid_di ... r_cnc.html
If you can provide the manual, we would be interested in working with you on your fiber laser project.