Centroid Community CNC Support Forum

I tried to open that schematic and it opens for me. Direct link is below, let me know if it still is not loading for you.
https://www.centroidcnc.com/dealersupport/schematics/uploads/S14812.r2.pdf

I went to the Acorn Schematics page and searched "mist" and the only diagram that pops up is ...

To follow up on Marc's explainer and to accomplish what you're trying to do, you need to look at your acorn_router_plc.src file in your C:/cncm directory using a text editor (Notepad++ is great) to determine the correct /XX to call with M94/M95.

Since you posted a report, I think I can point you ...

Hello imperio, welcome to the Forum!

The short answer is 'No'. A connection to a Centroid CNC control board is required for full use of the software, including working with the API.


The long answer is 'Kind of', you can install the "Offline Mill & Lathe Intercon" software from our downloads page ...

Has your Router been homed? If so, then something weird is going on. The original screenshots look like you were at the end of a job. Restart and rehome, does the button appear?

Hi Ryan,

Please post a report. Here's how:



What version of CNC12 are you running?

If I remember correctly M297/M298 were added in v5.24, so if you are on an older version then the 503 error makes sense.

Pressing "FN"+"ESC" is supposed to switch the F mode on those keyboards, give that a try but it's possible that's been changed in recent revisions of the K400.

Do you have another Logitech Unifying dongle plugged in to the PC? Sometimes the Logitech software misbehaves since it assumes you'll use ...

hi, we can get that unlocked. looks like a by product of us recently combining the knowledge base and the videos forum's into one.

and great discussion going on about new technologies to consider for cnc touch screens.


All,

The original topic is now unlocked, if you want to continue ...

Hello Glenn,

I moved this post to the Oak forum since you have an Oak. We answered you by email, but I'm echoing the explanation given here for other forum users.

Your control order included Offline Intercon for Mill/Lathe , that little USB dongle you found is the Hardware Unlock for full offline ...

Thanks Tom, I had checked this


Midy,

Just had a look at your report that you posted earlier today. In the report.txt file listed in the report.zip, it is showing that you have compile.cmd in the C:/cncm directory.


Directory of C:\cncm
...removed other items for brevity...
Tue Oct 15 19:34 ...

Hello guys,

thanks for getting back to me! I will create a report and post it sometime tomorrow.

As mentioned above, the two monitors are different, but both give the same display i.e they replicate the same control panel on each PC not matter which monitor is used.

Adam.


Adam,
That ...