Centroid Community CNC Support Forum

Buongiorno a tutti, we just finished installing the Centroid on a gantry machine with axes: X first axis Y second Z third W fourth pairing with and articulated head A and C, connected with Optic Direct. Motors and drives are Yaskawa Sigma7 programmed in precision mode. Oak Board and Mill Ultimate, I...

Buongiorno, I know it's a very simple file. Our customer is recently approaching programming with Centroid, following manual and posted videos. The problem occurs with any DXF file, this was an example that he sent me to try to load it in my laboratory, where it is loaded and processed correctly. Th...

Buongiorno a tutti, a customer reports to me a problem with DXF files. He loads them correctly, but the cross to select the zero point does not appear. I uploaded the same file to my PC and everything works fine. Has anyone had the same problem? Thank you in advance report_0008DC111213-0130231434_20...

We also use it without problems, but in Europe, the handweel MUST have a hardware emergency button to the current regulations.

Grazie,

In Europe it is necessary to have this emergency button.

Until now I have solved it in other ways, but this is much better.

Thanks again.

Emanuele

Buongiorno Houseman303,
Did you connect a handweel with an integrated emergency button?
How did you connect him to Oak?
Thank you in advance.

Q.: Is there perhaps a physical difference in the Z axis? More weight? Less friction? Less counterbalance?

Machine are very similar, the head is slightly heavier.

No friction or counterbalance

Buongiorno a tutti, I delayed the SV-ON signal by 10ms, only when disabling the drive, everything ok. As from your suggestion, I closed to the common also the reference. I would like to thank everyone for the support. I have a curiosity: since I installed version 5, the load meter bars have disappea...

That is strange. I would have expected Pn506 to reduce or eliminate the drop. Q.: Have you tried some alternative "stopping method" settings in Pn001, Pn00A and Pn00B? A.: yes, but nothing changes. Q.: Does the axis drop a similar amount if you disable the Z axis using "M93/Z", ...

Buongiorno a tutti, I replaced the control on a HURCO VM2 machine. The machine has axes motors and drives Yaskawa Sigma2, and a CIMR-MC5 spindle drive. It has a 16-position pneumatic swingarm tool changer. The drives are set in Velocity Mode, they are models with an old software. As a console, I use...