Search found 11 matches
- Sat Apr 13, 2024 10:52 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Articulated Head info request
- Replies: 0
- Views: 73
Articulated Head info request
Buongiorno a tutti, we just finished installing the Centroid on a gantry machine with axes: X first axis Y second Z third W fourth pairing with and articulated head A and C, connected with Optic Direct. Motors and drives are Yaskawa Sigma7 programmed in precision mode. Oak Board and Mill Ultimate, I...
- Tue Feb 06, 2024 3:44 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Problem with DXF file
- Replies: 4
- Views: 417
Re: Problem with DXF file
Buongiorno, I know it's a very simple file. Our customer is recently approaching programming with Centroid, following manual and posted videos. The problem occurs with any DXF file, this was an example that he sent me to try to load it in my laboratory, where it is loaded and processed correctly. Th...
- Mon Feb 05, 2024 8:32 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Problem with DXF file
- Replies: 4
- Views: 417
Problem with DXF file
Buongiorno a tutti, a customer reports to me a problem with DXF files. He loads them correctly, but the cross to select the zero point does not appear. I uploaded the same file to my PC and everything works fine. Has anyone had the same problem? Thank you in advance report_0008DC111213-0130231434_20...
- Fri Jan 19, 2024 3:18 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: wired mpg E-Stop integrate into plc
- Replies: 8
- Views: 1787
Re: wired mpg E-Stop integrate into plc
We also use it without problems, but in Europe, the handweel MUST have a hardware emergency button to the current regulations.
- Thu Jan 18, 2024 3:59 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: wired mpg E-Stop integrate into plc
- Replies: 8
- Views: 1787
Re: wired mpg E-Stop integrate into plc
Grazie,
In Europe it is necessary to have this emergency button.
Until now I have solved it in other ways, but this is much better.
Thanks again.
Emanuele
In Europe it is necessary to have this emergency button.
Until now I have solved it in other ways, but this is much better.
Thanks again.
Emanuele
- Wed Jan 17, 2024 6:31 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: wired mpg E-Stop integrate into plc
- Replies: 8
- Views: 1787
Re: wired mpg E-Stop integrate into plc
Buongiorno Houseman303,
Did you connect a handweel with an integrated emergency button?
How did you connect him to Oak?
Thank you in advance.
Did you connect a handweel with an integrated emergency button?
How did you connect him to Oak?
Thank you in advance.
- Tue Jun 06, 2023 9:16 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: HURCO VM2 with Yaskawa-Oak Z Brake Problem
- Replies: 8
- Views: 1044
Re: HURCO VM2 with Yaskawa-Oak Z Brake Problem
Q.: Is there perhaps a physical difference in the Z axis? More weight? Less friction? Less counterbalance?
Machine are very similar, the head is slightly heavier.
No friction or counterbalance
Machine are very similar, the head is slightly heavier.
No friction or counterbalance
- Tue Jun 06, 2023 9:13 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: HURCO VM2 with Yaskawa-Oak Z Brake Problem
- Replies: 8
- Views: 1044
Re: HURCO VM2 with Yaskawa-Oak Z Brake Problem
Buongiorno a tutti, I delayed the SV-ON signal by 10ms, only when disabling the drive, everything ok. As from your suggestion, I closed to the common also the reference. I would like to thank everyone for the support. I have a curiosity: since I installed version 5, the load meter bars have disappea...
- Mon Jun 05, 2023 8:24 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: HURCO VM2 with Yaskawa-Oak Z Brake Problem
- Replies: 8
- Views: 1044
Re: HURCO VM2 with Yaskawa-Oak Z Brake Problem
That is strange. I would have expected Pn506 to reduce or eliminate the drop. Q.: Have you tried some alternative "stopping method" settings in Pn001, Pn00A and Pn00B? A.: yes, but nothing changes. Q.: Does the axis drop a similar amount if you disable the Z axis using "M93/Z", ...
- Thu Jun 01, 2023 9:14 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: HURCO VM2 with Yaskawa-Oak Z Brake Problem
- Replies: 8
- Views: 1044
HURCO VM2 with Yaskawa-Oak Z Brake Problem
Buongiorno a tutti, I replaced the control on a HURCO VM2 machine. The machine has axes motors and drives Yaskawa Sigma2, and a CIMR-MC5 spindle drive. It has a 16-position pneumatic swingarm tool changer. The drives are set in Velocity Mode, they are models with an old software. As a console, I use...