Centroid Community CNC Support Forum

Hola Mauro Facilita mucho para que te ayuden que adjuntes un "Report", que contiene las características de la configuración de tu máquina. No se como aparece en la versión en español del programa, pero es muy sencillo. To create a report: 1 From the main CNC12 screen press F7 Utility 2 The...

Fusion 360 for personal use, formerly known as Fusion 360 for hobbyist use, is free online CAD for qualifying non-commercial users as a 3-year subscription.

https://www.autodesk.com/products/fusion-360/personal

Hugo

Sometimes it still appears to me, but it has little effect on the operation of the machine. I have Windows 10 updated in August 2022.

I already found how to configure G28, it was hard for me to find how to access the configuration window, but in the end I got it.
I'll give you the route in case anyone has doubts like he happened to me.

Setup>>Part>>WCS Table>>Return

Hugo

I put this video of the lathe doing some thread tests. I am very happy with the overall performance. I have a question: when you have the drill bits or boring tools in place, when you change the tools (which is now done in the home position) they will collide with the chuck. How can I change the pos...

If I have the "452" problem again, I'll try the option "100mbps Half duplex"

Hugo

I tried modifying the "Speed & Duplex" option. It was on "Auto negotiation" and I set it to "1.0 Gbps Full duplex"... but on this option I couldn't get it to communicate with Acorn, I rebooted, shutdown, etc. but I didn't get it. I was very reminded of the basic rul...

On my computer this error message appears during machining on the screen with the draw. I have not noticed any problem either in the machining or in the drawing, but I think that the problem is an excess of data during the drawing that the computer is not capable of processing and/or transmitting. p...

You are talking about "error 452" (not 432) right?
Hugo

Done! I already have the ATC working! https://youtu.be/_r-m5yPHkug Two important topics especially for users of the Emco PC Turn 50/55: I have set the "ToolTurretCounter" and "ToolTurretSyncBit" entries to "NO" IMG_5596.jpeg As commented on another occasion in this Foru...