Centroid Community CNC Support Forum

Thanks.... I just hate that I am discovering this now. I swear I called myself looking. I couldn't have imagined that I would be buying such an old design brand new. That being said, they still sell Simpson multimeters brand new. There is just so much information out there that it is sometimes hard ...

the G540 was great in its day, now there are much better and affordable choices out there for smooth quiet motion. I agree, the G540 should be rendered obsolete. Thank you for the replies. I do appreciate it. But I have to tell you, that is quite disheartening to read. I thought I did my research. ...

I am getting nearer to completing my upgrade. I finally got the Acorn, driver, power supplies etc installed in a aluminum box. I am using the Gecko G540 Driver connected via 25 pin ribbon cable. I am using IGUS Chainflex shielded cable. (Shield connected to earth ground.) I have a Meanwell 36V PS po...

Thanks! I am just now getting back to this. Sigh... it has been a crazy work week.

I very much appreciate the answer.

Greetings. I am upgrading the controller on my Onefinity Woodworker. https://www.onefinitycnc.com I have a question about connecting the com wire from the E-Stop Switch and the VFD. Both show going to the COM pin on the power connector. Would it be OK to connect them to the COM ports on the other si...

Thanks!!! Much appreciated!

I did see the number etched on the spindle but I wasn't sure if it was a model number or a lot number. That is why I provided the link.

Ahh.. How stupid of me... Of Course. The VFD is model # HY02D211B https://www.amazon.com/dp/B0775F4G47?ref=ppx_yo2ov_dt_b_product_details&th=1 Not sure of the model number of the spindle but here is the link: https://www.amazon.com/Huanyang-Spindle-Milling-24000RPM-Engraving/dp/B07LG233LM/ref=sr...

Anyone with links or insight as to the PD006 through 10 settings would be much appreciated. Thanks!

Greetings. This is my first post here but I have been reading many useful threads. I greatly appreciate them. I am retrofitting my CNC with the Acorn board. At the same time I had the opportunity to get a Huanyang Spindle setup. I have the 110V / 2.2Kw version. (Yes, I know that math doesn't work.) ...