Centroid Community CNC Support Forum

Good Afternoon All;

Totally re installed windows 10 pro starting with formatting the drive and all works now no errors on the com_stress_test. This is great, thanks a lot guys for the help

the pc is a lenovo tinkcentre I5 6500T 2.5ghz 4 cores, 4 treads and single treads rating of 1791 not that great but above the 1500.

Hello cnckeith; I will add a 0.1uf cap to the output and check again and if you say that it does not concern the rigid tapping, I will be ok with that. I forgot to mention that I also tried another pc with the same results. I did go through all of the above mentioned tb's and videos and changed the ...

Hello Everyone; Help This is a Trak mill that I have been working on for a while. It's fully functional, very accurate and I am very happy to have chosen Centroid Acorn to be the controller. I have also done a router (total rebuild AXYZ 4008) with the Centroid Acorn Controller, clearpath motors and ...

cnckeith;

I have the Teknic SDSK_RLN motors in the router on all axis ( X,Y,Z ) is there a specific motor from Teknics for the rotary A Axis that I should buy
I have seen one tread that the person was not using the RLN line and used the EQN line instead.

Thank you cnckeith

I will try to work on the Rotary 4th Axis lets see how far I can get.

Thanks again all you support guys Great job

I just returned from my workshop and I was going to post Exactly what you suggested. I was late but very happy no credit for me. Yes it works great now. Thank you for locking into this issue, it was driving me crazy. other notes: The ATC wizard does not retain the x value and if I edit the "Fix...

Thank you for your reply dpascucci_Support The carousel does rotate to the wrong bin no it does not go to the requested position all the time, (75/25) chance Looking at the PLC Detective The values of CurrentCarouselPosition_W work fine, the PLC correctly follows the pulses from the prox sensors The...

To cncKeith, AllIn1Chris, cncsnw and Gary Campbel: Thank you for the help The carousel is now running correctly, thank you guys. however 1 Problem still remains: The tool counter sensor; The led on the acorn INP2 (and I tried INP38 also) goes on and off has is should but the "Alt I" I/O di...