Centroid Community CNC Support Forum

A master list with more detail would be helpful.

A master list is not provided because the mapping depends on the actual hardware being used (DC3IOB, GPIO4D, etc). In general, a brain can use "ModBus Input 1 through 32 Bit Only" to get the raw input values coming from the MPU11, and "ModBus ...

Hi Riley,

It might help to use the state of "ModBus-Output-353-Bit Only" instead of "Enable3" in your brain -- the Ajax Enables Brain passes Enable3 through that output to tell the MPU11 to provide power to the motor, but your brain might be firing off first (releasing your brake). If that doesn't ...

Hi Matt,

To command a Z movement on M6, you should probably edit the macros (rather than the brains). Go to Operator --> VB Script Editor, then File --> Open File, then select M6Start.m1s or M6End.m1s (which are located within the Mach3/macros/Mach3Mill directory). You'll probably want to edit both ...

Hi rppman,

The posted installer is not a special version, it's just the latest one that includes a fix to the MPG issue you reported (high values of backlash caused it to misbehave). This particular version hasn't been tested as thoroughly as others, as the fix was fairly minor, and we wanted to ...

Hi Eric,

We now have a version of the plugin that supports G31 style commands. If you would like to test it, please email us at [url=mailto://tech@ajaxcnc.com]tech@ajaxcnc.com[/url] and we'll send you the installer.

Thanks,
-Aaron