centroid all in one pc

_______________________________________________________














LOGIN below to POST your questions and comments on AjaxCNC products.

Moderator: cnckeith

Post Reply
galyion
Posts: 7
Joined: Thu Feb 08, 2018 5:21 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
System Serial Number: none

centroid all in one pc

Post by galyion » Thu Feb 08, 2018 5:28 pm

I'm at the point of my conversion of a mini 7x10 lathe i need to buy the PC. I'm looking at an all in one from best buy or the one Centroid sells. does anyone have any more info on the Centroid one? Just wondering how it compares to a similarly priced one from elsewhere.

Sportbikeryder
Posts: 23
Joined: Thu Jan 26, 2017 11:45 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: Yes
System Serial Number: TBD when back at shop
Location: North Carolina

Re: centroid all in one pc

Post by Sportbikeryder » Fri Feb 09, 2018 9:40 am

From my experience you may be better off to stay clear of any normal retail outlet for purchasing a computer as they usually come packed full of extra installed software that will likely be very annoying. I have had better luck with either more generic suppliers or even buying refurbished / off lease computers as they are usually supplied with only a basic install of the OS.

Centroid_Liviu
Posts: 281
Joined: Mon Jul 18, 2011 9:57 am
Allin1DC CNC Controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
System Serial Number: none

Re: centroid all in one pc

Post by Centroid_Liviu » Fri Feb 09, 2018 11:50 am

The Centroid ALLIN1PC is set up ready to go and communicate with our Controls. The PCs run Windows 10 and are equipped with a Touchscreen. We do not make the ALLIN1PCs but we do set them up, which does involve removing all the bloatware that comes on them from a typical retailer.

galyion
Posts: 7
Joined: Thu Feb 08, 2018 5:21 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
System Serial Number: none

Re: centroid all in one pc

Post by galyion » Fri Feb 09, 2018 2:01 pm

I was asking for more information on the specs of the computer.

Centroid_Liviu
Posts: 281
Joined: Mon Jul 18, 2011 9:57 am
Allin1DC CNC Controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
System Serial Number: none

Re: centroid all in one pc

Post by Centroid_Liviu » Mon Feb 12, 2018 1:02 pm

For the ALLIN1PC: 19" Touch-Screen, 4GB RAM, Intel i3 Processor, 1TB hard-drive. Specifications are subject to change.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest