How to match up Pro License files with Acorn boards

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
cnckeith
Posts: 605
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
System Serial Number: none
Contact:

How to match up Pro License files with Acorn boards

Post by cnckeith » Thu Jan 25, 2018 3:20 pm

Now that several users have multiple Acorn installations we've been asked whats the best way to match up a License file with the corresponding Acorn board. Here is how.

The license.dat file will have a filename that contains the Acorn serial number like this one.
license-Hugh-B0D5CC536E0C-1024170186-pro-mill.dat

the last digits 0186 is the Acorn serial number. this is displayed on the screen
hugh.JPG
and here is an example of the Acorn serial that is displayed on the CNC12 F1 setup screen.
cnc12 setup scree.JPG
cnc12 setup scree 94.JPG
the cnc12 screen show the system is 0094, this acorn # 94 so it would require a license file that matches.
like so.. license-985DAD489F1F-0823170094-pro-mill.dat

A report.zip file also contains the Acorn serial number and the date the report was created.
example
report serial.JPG

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest