cnc12 lathe or mil not starting

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
Serge10667
Posts: 3
Joined: Tue Jan 23, 2018 8:13 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

cnc12 lathe or mil not starting

Post by Serge10667 »

I installed new CNC12 lathe worked fine with the test set up
I installed CNC12 mill on the same PC, not starting and CNC 12 lathe not starting also, the led communication and blue hard beet are ok.
How do I fix this problem?
Can we install both lathe and mill on the same PC
Serge10667
Posts: 3
Joined: Tue Jan 23, 2018 8:13 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

Re: cnc12 lathe or mil not starting

Post by Serge10667 »

Hi,
The problem was no communication with the Ethernet the green light was not blinking.
I powered down the 24V supply and restarted it, the cnc121 is communicating correctly with the PC with the green light blinking all the time. Both programs CNC 121 Lathe and Mill are working correctly.
Hope this will help someone else.
frijoli
Posts: 595
Joined: Tue Sep 12, 2017 10:03 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 1030090099
DC3IOB: Yes
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: No
Location: Outside Winston-Salem, NC
Contact:

Re: cnc12 lathe or mil not starting

Post by frijoli »

Thanks for sharing the solution!

Clay
Clay
near Winston-Salem, NC
unofficial ACORN fb group https://www.facebook.com/groups/897054597120437/
Post Reply