Does anyone have any keypad icons for the lathe one-shot routines? I'm going to label my Aux keys and I was just hoping someone had icons for Chamfer, Turning, Facing, Radius, and Drill one shots. I have the icons below for the mill one-shots and was hoping there were some lathe ones floating about.
Stock Keypad Icons for Lathe One Shots
Moderator: cnckeith
-
- Posts: 3122
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Stock Keypad Icons for Lathe One Shots
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
-
- Posts: 3122
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: Stock Keypad Icons for Lathe One Shots
Alright. Here are the icons I came up with - still hoping someone has something better:
Individual icons are in the ZIP attached. They look pretty good when scaled to 1/2"x1/2" and printed on my Brady label maker. Need to get some 1/2" Black on Clear labels and then I'll post a photo of them on the lathe control.
Individual icons are in the ZIP attached. They look pretty good when scaled to 1/2"x1/2" and printed on my Brady label maker. Need to get some 1/2" Black on Clear labels and then I'll post a photo of them on the lathe control.
- Attachments
-
- LatheIcons.zip
- (51.43 KiB) Downloaded 118 times
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
-
- Posts: 595
- Joined: Tue Sep 12, 2017 10:03 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 1030090099
- DC3IOB: Yes
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: No
- Location: Outside Winston-Salem, NC
- Contact:
Re: Stock Keypad Icons for Lathe One Shots
I really like this idea.
Clay
Clay
Clay
near Winston-Salem, NC
unofficial ACORN fb group https://www.facebook.com/groups/897054597120437/
near Winston-Salem, NC
unofficial ACORN fb group https://www.facebook.com/groups/897054597120437/
-
- Posts: 3122
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: Stock Keypad Icons for Lathe One Shots
Here's the completed one shot icon labels. I also printed a white on clear label for the work light.
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
-
- Posts: 56
- Joined: Tue Dec 26, 2017 11:16 am
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 102978, 8121, REV233
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: Stock Keypad Icons for Lathe One Shots
Golly my lathe dose not have that one shot option that I know of is this a custom program?
-
- Posts: 3122
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: Stock Keypad Icons for Lathe One Shots
Toolmaker, you have them, you just need to turn them on. Check your Centroid operators manual, chapter 14, and look at parameters 188-199 to set your aux key functions.
The worklight was a custom PLC mod, but easy enough if you are interested.
The worklight was a custom PLC mod, but easy enough if you are interested.
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
-
- Posts: 56
- Joined: Tue Dec 26, 2017 11:16 am
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 102978, 8121, REV233
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: Stock Keypad Icons for Lathe One Shots
This is so cool I have had my mill for over 14 years and lathe for 10 and never new this.