MPG cable JST connector number? <answered >
Moderator: cnckeith
-
- Posts: 3095
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
MPG cable JST connector number? <answered >
Some idiot who shall remain nameless misplaced the connectors that came with his OAK and now he needs the part number for the JST plug that connects to the MPG header on the OAK (same as the MPU11/ALLIN1DC). I believe the connector is PDUP-24V-s and the contacts are SPUD-002T-P0.5. Can someone confirm this or give me the correct number so I can look for some replacements?
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
-
- Posts: 286
- Joined: Thu Mar 18, 2010 2:24 pm
Re: MPG cable JST connector number?
The manufacturer part number for the MPG connector is PADP-24V-1-S and you can order them here https://www.digikey.com/product-detail/ ... ND/1300227 while the manufacturer part number for the pins for that connector is SPH-001T-P0.5L and you can order them here https://www.digikey.com/products/en?key ... -2147-2-ND.
When requesting support, please ALWAYS post a current report. Find out how to take a report from your Acorn, CNC11 or CNC10 system here: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
If your question is PLC, Macro or program related, please also post a copy of the program or macro as well.
Without the above information we may not be able to help and/or reply until the required information is posted..
If your question is PLC, Macro or program related, please also post a copy of the program or macro as well.
Without the above information we may not be able to help and/or reply until the required information is posted..