Stock Keypad Icons for Lathe One Shots

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
tblough
Posts: 3071
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Boston, MA
Contact:

Stock Keypad Icons for Lathe One Shots

Post by tblough »

Does anyone have any keypad icons for the lathe one-shot routines? I'm going to label my Aux keys and I was just hoping someone had icons for Chamfer, Turning, Facing, Radius, and Drill one shots. I have the icons below for the mill one-shots and was hoping there were some lathe ones floating about.
Mill Jog Panel Custom Overlay.jpg
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
tblough
Posts: 3071
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Boston, MA
Contact:

Re: Stock Keypad Icons for Lathe One Shots

Post by tblough »

Alright. Here are the icons I came up with - still hoping someone has something better:
Icons.png
Individual icons are in the ZIP attached. They look pretty good when scaled to 1/2"x1/2" and printed on my Brady label maker. Need to get some 1/2" Black on Clear labels and then I'll post a photo of them on the lathe control.
Attachments
LatheIcons.zip
(51.43 KiB) Downloaded 115 times
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
frijoli
Posts: 595
Joined: Tue Sep 12, 2017 10:03 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 1030090099
DC3IOB: Yes
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: No
Location: Outside Winston-Salem, NC
Contact:

Re: Stock Keypad Icons for Lathe One Shots

Post by frijoli »

I really like this idea.

Clay
Clay
near Winston-Salem, NC
unofficial ACORN fb group https://www.facebook.com/groups/897054597120437/
tblough
Posts: 3071
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Boston, MA
Contact:

Re: Stock Keypad Icons for Lathe One Shots

Post by tblough »

Here's the completed one shot icon labels. I also printed a white on clear label for the work light.
One Shot Icons.jpg
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
toolmaker101
Posts: 56
Joined: Tue Dec 26, 2017 11:16 am
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 102978, 8121, REV233
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: Yes

Re: Stock Keypad Icons for Lathe One Shots

Post by toolmaker101 »

Golly my lathe dose not have that one shot option that I know of is this a custom program?
tblough
Posts: 3071
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Boston, MA
Contact:

Re: Stock Keypad Icons for Lathe One Shots

Post by tblough »

Toolmaker, you have them, you just need to turn them on. Check your Centroid operators manual, chapter 14, and look at parameters 188-199 to set your aux key functions.

The worklight was a custom PLC mod, but easy enough if you are interested.
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
toolmaker101
Posts: 56
Joined: Tue Dec 26, 2017 11:16 am
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 102978, 8121, REV233
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: Yes

Re: Stock Keypad Icons for Lathe One Shots

Post by toolmaker101 »

This is so cool I have had my mill for over 14 years and lathe for 10 and never new this. :lol: :D
Post Reply