I was doing the run-in on my lathe yesterday - still need to adjust the gibs, create a screw map for X, and finish the ballscrew/scale cover for X. In the last half of the video, I'm not sure if the axis load bars are correctly showing the loads on my third party drives. Does anyone have and tips/tricks for coming up with the gain settings for the torque mode estimation parameters?
https://youtu.be/PXosbnDB65k
Parameters 336-339 Motor Torque Estimation
Moderator: cnckeith
-
- Posts: 3111
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Parameters 336-339 Motor Torque Estimation
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.