Hardinge Accuslide Gang Tool Lathe Acorn Conversion
Moderator: cnckeith
-
- Posts: 9915
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Hardinge Accuslide Gang Tool Lathe Acorn Conversion
Turned out nice!
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 793
- Joined: Thu Apr 12, 2018 11:16 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: Hardinge Accuslide Gang Tool Lathe Acorn Conversion
Finally getting to wiring in the new control. It’s a lot in a small space.
-
- Posts: 43
- Joined: Sat Sep 08, 2018 8:04 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
Re: Hardinge Accuslide Gang Tool Lathe Acorn Conversion
Wow! I'm impressed with your component placement and wiring tidiness, considering the space constraints. The labeled shrink wrap are things dreams are made of.
-
- Posts: 793
- Joined: Thu Apr 12, 2018 11:16 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: Hardinge Accuslide Gang Tool Lathe Acorn Conversion
Made a little progress on the lathe today. There are plenty of holes for cable pass through in the enclosure.
Drew up a snap together cable gland that uses existing holes and fasteners.
Holds the cable nicely.
-
- Posts: 9915
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Hardinge Accuslide Gang Tool Lathe Acorn Conversion
Very nice!
Marty
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 68
- Joined: Wed Apr 07, 2021 11:16 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: will obtain
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Hardinge Accuslide Gang Tool Lathe Acorn Conversion
How is this project coming along? I just aquired a CHNC chucker and Im interested in seeing your encoder setup
Looks awesome!!!
Looks awesome!!!
-
- Posts: 7554
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Hardinge Accuslide Gang Tool Lathe Acorn Conversion
Nice work, looks great thanks for sharing your ideas
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 793
- Joined: Thu Apr 12, 2018 11:16 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: Hardinge Accuslide Gang Tool Lathe Acorn Conversion
Slowly. I have everything for the conversion, work on it when I have time.
-
- Posts: 793
- Joined: Thu Apr 12, 2018 11:16 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: Hardinge Accuslide Gang Tool Lathe Acorn Conversion
Almost done with wiring on the lathe. Waiting on some stuff to arrive to finish the encoder wiring and I'll be done.
Lower cabinet: There are a few spots that could use a blanking plate. 3d printed this one. Worked out well.
It looks like originally there was a cover for the axis ball screw. It's long gone.
Cut this out of 12ga mild steel. It's way over kill, but the sheet was on the plasma. Worked well.
Close to be wrapped up.
I have a lot of learning to do before I'll be doing anything meaningful with the lathe. I ordered a few tools. I have a lot of tool holders I bought a while back. Need to get a small assortment of tools and sort out using the conversational programming to make a part. The encoder will allow for threading.
Lower cabinet: There are a few spots that could use a blanking plate. 3d printed this one. Worked out well.
It looks like originally there was a cover for the axis ball screw. It's long gone.
Cut this out of 12ga mild steel. It's way over kill, but the sheet was on the plasma. Worked well.
Close to be wrapped up.
I have a lot of learning to do before I'll be doing anything meaningful with the lathe. I ordered a few tools. I have a lot of tool holders I bought a while back. Need to get a small assortment of tools and sort out using the conversational programming to make a part. The encoder will allow for threading.