Quencharc

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
dbunyip
Posts: 11
Joined: Sun Nov 12, 2017 12:08 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No

Quencharc

Post by dbunyip »

Does anyone have pictures of how the Quencharc are supposed to be installed. The TB206.pdf document only shows 1 of the pictures for me. Does it only take 1 across the 2 coil terminals or does it go across the 2 power lines as well on the contactor?
cnckeith
Posts: 7166
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: Quencharc

Post by cnckeith »

Snubbers (quencharc) are installed Across coils
from the Acorn Schematics Library, schematic #S14826 download here. http://www.centroidcnc.com/centroid_diy ... matics.zip

snubber_1600.jpg
acorn snubberJPG.JPG
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
dbunyip
Posts: 11
Joined: Sun Nov 12, 2017 12:08 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No

Re: Quencharc

Post by dbunyip »

On 220v they go across L2 and L2 at the motor?
cnckeith
Posts: 7166
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: Quencharc

Post by cnckeith »

Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Post Reply