OAK 24V Connections

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
tblough
Posts: 3072
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Boston, MA
Contact:

OAK 24V Connections

Post by tblough »

Are the +24V, and +24V Return connections on Spindle Analog Out connector only used for the analog spindle I/O? I'm wondering if it would be better to bring these over from my VFD instead of the Oak power supply.

Thanks,

Tom
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
diycncscott

Re: OAK 24V Connections

Post by diycncscott »

The 24VDC on that header is for Servo drive I/O.

If you look at your schematic, you'll see that the voltage (or common depending on whether your VFD is setup for sourcing or sinking) for your spindle drive I/O DOES come from the spindle drive and is routed through the Spindle Enable, Spindle Direction, Reset outputs and to the SpindleInverterOk input.
tblough
Posts: 3072
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Boston, MA
Contact:

Re: OAK 24V Connections

Post by tblough »

Scott,

I am using the drives 24V for the digital I/O - Spindle Enable, Spindle Direction, Reset outputs and to the SpindleInverterOk. That's what got me to wondering if I needed to do the same thing for the two analog signals to/from the drive.

For what it's worth, I've attached the schematic I came up with for my machine.
Attachments
Hardinge Centroid HLV-H10140T.pdf
(460.13 KiB) Downloaded 105 times
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Post Reply