Power supply question...

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
DocsMachine
Posts: 150
Joined: Mon Oct 30, 2017 8:43 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

Power supply question...

Post by DocsMachine »

In one of Marty's videos, he mentions replacing the power supply provided with the Acorn board, with one that also has a 5V tap for the stepper driver signal power. He mentioned the name of the supplier, but I can't recall the name, nor which video I saw it in.

Can anyone point me towards that supplier, or better yet, to the actual power supply he was referring to? Much as I'd like to rewatch all the videos, I'm just a tad short on time right now. :D

Thanks in advance.
Doc.
DICKEYBIRD
Posts: 536
Joined: Sat Jul 08, 2017 7:38 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: n/a yet
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
Location: Collierville, TN USA

Re: Power supply question...

Post by DICKEYBIRD »

It was a Mean Well power supply Doc. That's the only thing about videos I don't like. Hard to search for a specific little bit of info.
Milton in Collierville, TN

"Accuracy is the sum total of your compensating mistakes."
cnckeith
Posts: 7164
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: Power supply question...

Post by cnckeith »

meanwell rq-50D works well. cheap too.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
762x51
Posts: 119
Joined: Wed Aug 02, 2017 8:40 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: B0D5CC56DD75-0605170063 , 985DAD4295CF-0928170127 , 38D2694E4703-1222170401
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
Location: Near Guilford College, Greensboro, NC
Contact:

Re: Power supply question...

Post by 762x51 »

A lower cost alternative would be the Meanwell RD-35B
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: Power supply question...

Post by martyscncgarage »

762x51 wrote: Fri Dec 01, 2017 9:24 am A lower cost alternative would be the Meanwell RD-35B
Yup, sorry! I thought I mentioned the supplier! JAMECO.COM:
https://www.jameco.com/z/RD-35B-MEAN-WE ... 23380.html
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Post Reply