CNC Keith,
I just finished putting together my acorn and downloading the software and the Virtual Control Panel did not load! Very frustrating. Everything else is ready, but we can't do anything without the control panel. Also, the touch screen does not work when the software is opened.
How do I get that control panel to open with the software?
Andrea
Virtual Control Panel (resolved)
Moderator: cnckeith
-
- Posts: 4
- Joined: Mon Nov 27, 2017 1:35 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 9884e39547cf-1024170174
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
-
- Posts: 536
- Joined: Sat Jul 08, 2017 7:38 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: n/a yet
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
- Location: Collierville, TN USA
Re: Virtual Control Panel
You are using a 16:9 monitor, yes? DAMHIK!
Milton in Collierville, TN
"Accuracy is the sum total of your compensating mistakes."
"Accuracy is the sum total of your compensating mistakes."
-
- Posts: 4
- Joined: Mon Nov 27, 2017 1:35 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 9884e39547cf-1024170174
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
Virtual control Panel
This morning, I uninstalled and reinstalled the acorn software.
Upon opening the software, the VCP icon opened as well in the taskbar.
Although the VCP is running, it can't be seen.
How do I shrink to fit the software AND the VCP on the monitor?
Andrea
Upon opening the software, the VCP icon opened as well in the taskbar.
Although the VCP is running, it can't be seen.
How do I shrink to fit the software AND the VCP on the monitor?
Andrea
-
- Posts: 4
- Joined: Mon Nov 27, 2017 1:35 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 9884e39547cf-1024170174
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
Re: Virtual control Panel
Thanks in advance.
Andrea
Andrea
-
- Posts: 428
- Joined: Mon Jul 18, 2011 9:57 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: Virtual control Panel
What resolution are you running on your computer? Is this a 4:3 or 16:9 (widescreen) monitor?
When requesting support READ THIS POST first. https://www.viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
-
- Posts: 4
- Joined: Mon Nov 27, 2017 1:35 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 9884e39547cf-1024170174
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
Re: Virtual control Panel
Thank you to CNC Keith and Centroid Liviu.
We swapped out a monitor and it turns out the ELO Touchscreen we were using couldn't handle the software.
We turned on the swap and everything works great.
Thank you very much for your quick response and your assistance.
Andrea
We swapped out a monitor and it turns out the ELO Touchscreen we were using couldn't handle the software.
We turned on the swap and everything works great.
Thank you very much for your quick response and your assistance.
Andrea