Centroid has a schematic to wire up the HY VFDs. Attached are the VFD BASE parameter settings to help get you going if you follow that schematic.
As with any VFD, there are MANY parameter settings to fine tune it to your application. You will have to read the manual, which isn't that terrible.
Remember, the Acorn schematic set can be found here: http://www.centroidcnc.com/centroid_diy ... oller.html
Huan Yang VFD Parameter Settings
Moderator: cnckeith
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Huan Yang VFD Parameter Settings
- Attachments
-
- HuanYuang VFD Setup for 0-10v input.pdf
- (14.75 KiB) Downloaded 194 times
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Huan Yang VFD Parameter Settings
Please let us know if you find any errors and if you have any tips and tricks to fine tuning the HY VFDs
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ