alarm 916

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
mike
Posts: 4
Joined: Mon Sep 18, 2017 4:28 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: 0615050824
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes

alarm 916

Post by mike »

Anytime i use the MDI I get this fault can you help me?
Attachments
20170918_155217.jpg
report.zip
(63.36 KiB) Downloaded 96 times
diycncscott

Re: alarm 916

Post by diycncscott »

It says your estop is pressed.........................
mike
Posts: 4
Joined: Mon Sep 18, 2017 4:28 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: 0615050824
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes

Re: alarm 916

Post by mike »

The picture is just for the serial number I can run programs with no problem just when I try to use the MDI I to make a move to re zero I get this fault
Centroid_Tech
Posts: 286
Joined: Thu Mar 18, 2010 2:24 pm

Re: alarm 916

Post by Centroid_Tech »

It's most likely because parameter 11 is set to -14 rather than 14. From the main screen press F1(Setup)->F3(Config)->default password is 137->F3(Params). Change the value of parameter 11 and press F10(Save). See if that helps you out.
When requesting support, please ALWAYS post a current report. Find out how to take a report from your Acorn, CNC11 or CNC10 system here: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.

If your question is PLC, Macro or program related, please also post a copy of the program or macro as well.

Without the above information we may not be able to help and/or reply until the required information is posted..
mike
Posts: 4
Joined: Mon Sep 18, 2017 4:28 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: 0615050824
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes

Re: alarm 916

Post by mike »

Parameter 11 is set to -14 rather than 14 ??
mike
Posts: 4
Joined: Mon Sep 18, 2017 4:28 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: 0615050824
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes

Re: alarm 916

Post by mike »

Nevermind normally open normally closed I read the manual thanks for the quick reply
Post Reply