alarm 916
Moderator: cnckeith
-
- Posts: 4
- Joined: Mon Sep 18, 2017 4:28 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: 0615050824
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
alarm 916
Anytime i use the MDI I get this fault can you help me?
- Attachments
-
- report.zip
- (63.36 KiB) Downloaded 97 times
-
- Posts: 4
- Joined: Mon Sep 18, 2017 4:28 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: 0615050824
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: alarm 916
The picture is just for the serial number I can run programs with no problem just when I try to use the MDI I to make a move to re zero I get this fault
-
- Posts: 286
- Joined: Thu Mar 18, 2010 2:24 pm
Re: alarm 916
It's most likely because parameter 11 is set to -14 rather than 14. From the main screen press F1(Setup)->F3(Config)->default password is 137->F3(Params). Change the value of parameter 11 and press F10(Save). See if that helps you out.
When requesting support, please ALWAYS post a current report. Find out how to take a report from your Acorn, CNC11 or CNC10 system here: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
If your question is PLC, Macro or program related, please also post a copy of the program or macro as well.
Without the above information we may not be able to help and/or reply until the required information is posted..
If your question is PLC, Macro or program related, please also post a copy of the program or macro as well.
Without the above information we may not be able to help and/or reply until the required information is posted..
-
- Posts: 4
- Joined: Mon Sep 18, 2017 4:28 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: 0615050824
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: alarm 916
Parameter 11 is set to -14 rather than 14 ??
-
- Posts: 4
- Joined: Mon Sep 18, 2017 4:28 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: 0615050824
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: alarm 916
Nevermind normally open normally closed I read the manual thanks for the quick reply