Anamet Anaconda MTC Conduit <<Answered>>

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
tblough
Posts: 3072
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Boston, MA
Contact:

Anamet Anaconda MTC Conduit <<Answered>>

Post by tblough »

I really like the flexibility of the Anamet MTC conduit Centroid uses on their kits but I have not been able to locate anyplace that sells it in less than 100' rolls. Has anyone else seen this anywhere you can buy it by the foot? Centroid - do you sell this to the DIY community?

Thanks,

Tom
Last edited by tblough on Thu Jan 04, 2018 5:49 pm, edited 2 times in total.
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Centroid_Liviu
Posts: 428
Joined: Mon Jul 18, 2011 9:57 am
Allin1DC CNC Controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes

Re: Anamet Anaconda MTC Conduit

Post by Centroid_Liviu »

Are you looking for just the conduit or the conduit with end connectors? Our standard console extension 6' conduit (no cables inside) with end connectors is $115.
When requesting support READ THIS POST first. https://www.viewtopic.php?f=60&t=1043

Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.

(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: Anamet Anaconda MTC Conduit

Post by martyscncgarage »

Not exactly the same, but very flexibie:
https://www.mcmaster.com/#standard-elec ... t/=1992y67
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
tblough
Posts: 3072
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Boston, MA
Contact:

Re: Anamet Anaconda MTC Conduit

Post by tblough »

Thanks, Liviu and Marty. I was looking for 3/4" Anaconda not the 1.25" console extension and I did find a place that will sell by the foot. West Side Electric Supplyin South Elgin, Illinois has all the sizes sells cut lengths. For anyone who is building a CNC machine, Anamet Anaconda M.T.C. conduit is the most flexible metallic conduit I have ever found. It is even more flexible than most non-metallic conduit (even more flexible that McMaster's flex-rated non-metallic offering, Marty) and being made for machine tools is oil-resistant.

Here's the manufacturer's web page on the product - http://flexiblewiringconduits.anacondas ... nduit-lfmc

Cheers,

Tom
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Post Reply