On the page where the Acorn, Allin, and OAK controllers are compared there is a mention that USB MPG Compatible is TBA - Has anyone heard any updates on this very handy option?
Reference: http://www.centroidcnc.com//centroid_di ... y_cnc.html
USB MPG
Moderator: cnckeith
-
- Posts: 119
- Joined: Wed Aug 02, 2017 8:40 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: B0D5CC56DD75-0605170063 , 985DAD4295CF-0928170127 , 38D2694E4703-1222170401
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
- Location: Near Guilford College, Greensboro, NC
- Contact:
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: USB MPG
Right now, the only one Bill (Aka: Beevo) VanOrden and I have tested is the X-keys XK-24 keypad. It does make it a little more convenient to get closer to the machine to setup your part, its kind of a remote version of some of the keys on Virtual Control Panel. (Note, you have to load a macro and make your key cap icons) I believe Centroid is working on another. We're still in Acorn's infancy, I'm sure we'll see them in the not to distant future.762x51 wrote: ↑Sun Aug 20, 2017 10:53 pm On the page where the Acorn, Allin, and OAK controllers are compared there is a mention that USB MPG Compatible is TBA - Has anyone heard any updates on this very handy option?
Reference: http://www.centroidcnc.com//centroid_di ... y_cnc.html
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 7334
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: USB MPG
USB MPG is in the works..we have one running on bench..just need some time to finalize firmware.. and then release! more info soon
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 119
- Joined: Wed Aug 02, 2017 8:40 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: B0D5CC56DD75-0605170063 , 985DAD4295CF-0928170127 , 38D2694E4703-1222170401
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
- Location: Near Guilford College, Greensboro, NC
- Contact:
Re: USB MPG
Hi Marty and Keith,
Thanks for the response to my question.
Orin
Thanks for the response to my question.
Orin
-
- Posts: 119
- Joined: Wed Aug 02, 2017 8:40 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: B0D5CC56DD75-0605170063 , 985DAD4295CF-0928170127 , 38D2694E4703-1222170401
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
- Location: Near Guilford College, Greensboro, NC
- Contact:
Re: USB MPG
Hi Keith,
Any update on the USB MPG?
Orin
-
- Posts: 595
- Joined: Tue Sep 12, 2017 10:03 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 1030090099
- DC3IOB: Yes
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: No
- Location: Outside Winston-Salem, NC
- Contact:
Re: USB MPG
Very interested in this as well.
Clay
near Winston-Salem, NC
unofficial ACORN fb group https://www.facebook.com/groups/897054597120437/
near Winston-Salem, NC
unofficial ACORN fb group https://www.facebook.com/groups/897054597120437/
-
- Posts: 7334
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: USB MPG
here is photo of the unit we are writing a driver for.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 654
- Joined: Sat Sep 23, 2017 7:57 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
- Location: Honolulu, HI
Re: USB MPG
I'm interested in this as well. I saw a YouTube video by the guy who got me to buy the Acorn and I could have sworn he said you could use an Xbox controller. All that was necessary was an inexpensive add-on to the software...something along those lines. I'm using an Xbox controller with Mach and I like the joystick type controls. The Mach plug-in doesn't allow the configuration I'd like but it still works well enough and is dirt cheap.
Edit: I found it, I think. Looks nice! Is it a wireless pendant or wired?
Edit: I found it, I think. Looks nice! Is it a wireless pendant or wired?
-
- Posts: 7334
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Xbox controller
ScotY,
Hello.
You can use a Xbox controller as well. Rick posted a video on YouTube. I've shared it below.
Basically any USB device that has keyboard emulation capabilities can be used with the Centroid CNC12 (Acorn) software.
Rick says "The Centroid Acorn CNC system can be controlled by a standard X Box Controller ($15 at Wal-Mart including shipping) by purchasing a driver (https://www.rewasd.com/) for $6.00."
and here is a link to Ricks DIY instructions on how to setup the Xbox controller to work with Acorn CNC12. http://rick.sparber.org/XBCA.pdf
https://youtu.be/y_-tPoq_2tU
Hello.
You can use a Xbox controller as well. Rick posted a video on YouTube. I've shared it below.
Basically any USB device that has keyboard emulation capabilities can be used with the Centroid CNC12 (Acorn) software.
Rick says "The Centroid Acorn CNC system can be controlled by a standard X Box Controller ($15 at Wal-Mart including shipping) by purchasing a driver (https://www.rewasd.com/) for $6.00."
and here is a link to Ricks DIY instructions on how to setup the Xbox controller to work with Acorn CNC12. http://rick.sparber.org/XBCA.pdf
https://youtu.be/y_-tPoq_2tU
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 7334
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: USB MPG
Edit: I found it, I think. Looks nice! Is it a wireless pendant or wired?
The PHB04B in the photo is the one that we are building a driver for and it is a wireless pendant.
(There is a wired version of it as well and we may create a driver for it.)
The PHB04B in the photo is the one that we are building a driver for and it is a wireless pendant.
(There is a wired version of it as well and we may create a driver for it.)
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html