Quick Tip: Installing your Acorn Software License Unlock Code

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
martyscncgarage
Posts: 722
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No
System Serial Number: none
Location: Mesa, AZ

Quick Tip: Installing your Acorn Software License Unlock Code

Post by martyscncgarage » Sun Aug 20, 2017 9:23 pm

This one is thanks to Orin:
If you purchased the PRO or ULTIMATE Level software, you will receive an Unlock license code via email. Here is how you install it:

From Liviu, Centroid Support:
The below instructions are going to be included with every unlock from now on:

Acorn License Installation Instructions:

1) Save the attached license.dat file on the CNCPC desktop
2) With Acorn powered up and running, Start the CNC12 software.
3) Press "F7" Utility menu
4) Choose the "F8" Option menu
5) Choose the "F2" Import Unlocks function. This will open a file dialog. Navigate to the desktop (or the location where the license file attachment was saved) and select the license.dat file. Click "Open". CNC12 will then respond with a message stating that the license was successfully imported.
"Jack of all trades, master of none!"
Mesa, AZ

Post Reply

Who is online

Users browsing this forum: cnckeith and 3 guests