Touch Screen Monitors

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

martyscncgarage
Posts: 954
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No
System Serial Number: none
Location: Mesa, AZ

Touch Screen Monitors

Post by martyscncgarage » Wed Aug 09, 2017 9:12 am

Getting questions about Touchscreen monitor sourcing.
I suggest ASUS VT207N 19.5" Monitor. You can google search it, but seems New Egg has a good price and occasionally, has reconditioned units.
They also have a smaller 15.6" Touchscreen, the VT168H, which is only a little less than its bigger brother. BUT if you need a smaller one for a smaller machine it might be the ticket.

Let's keep this thread going, so reply here. If you find hot deal for a nice touchscreen monitor post it so the rest of us can find out about it!

Marty
Last edited by martyscncgarage on Wed Sep 06, 2017 8:47 am, edited 1 time in total.
"Jack of all trades, master of none!"
Mesa, AZ

cnckeith
Posts: 605
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
System Serial Number: none
Contact:

Re: Touch Screen Monitors

Post by cnckeith » Tue Aug 15, 2017 3:44 pm

I'm using a HP Business L4Q76A8#ABA 22" E220t TMNT Monitor
and i just saw these on amazon as well.
https://www.amazon.com/ViewSonic-TD2220 ... 6570747011

762x51
Posts: 118
Joined: Wed Aug 02, 2017 8:40 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
System Serial Number: B0D5CC56DD75-0605170063 , 985DAD4295CF-0928170127 , 38D2694E4703-1222170401
Location: Near Guilford College, Greensboro, NC
Contact:

Re: Touch Screen Monitors

Post by 762x51 » Tue Aug 15, 2017 4:28 pm

I was going to buy a touchscreen monitor but looking at the specs on my "shop" PC, I found that I needed to update the PC as well.

As I was looking around I saw the Dell Inspiron 3263 All-In-One Computer was on sale for $480 so I decided to go that way and picked up one yesterday.
It has the gen 6 i3-6100U processor and the replacement (Inspiron 3264) a gen 7 i3-7100U.
Looking up the benchmarks of the processor showed that they were so close that spending a couple of hundred more on the new one made no sense to me.

http://www.officedepot.com/a/products/9 ... ll-In-One/

Acorn arrived about an hour ago so I'm getting ready to start the initial setup and testing.
I'll be following this video https://www.youtube.com/watch?v=Akmw8ak ... e=youtu.be step-by-step.

Orin

martyscncgarage
Posts: 954
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No
System Serial Number: none
Location: Mesa, AZ

Re: Touch Screen Monitors

Post by martyscncgarage » Tue Aug 15, 2017 6:00 pm

762x51 wrote:
Tue Aug 15, 2017 4:28 pm
I was going to buy a touchscreen monitor but looking at the specs on my "shop" PC, I found that I needed to update the PC as well.

As I was looking around I saw the Dell Inspiron 3263 All-In-One Computer was on sale for $480 so I decided to go that way and picked up one yesterday.
It has the gen 6 i3-6100U processor and the replacement (Inspiron 3264) a gen 7 i3-7100U.
Looking up the benchmarks of the processor showed that they were so close that spending a couple of hundred more on the new one made no sense to me.

http://www.officedepot.com/a/products/9 ... ll-In-One/

Acorn arrived about an hour ago so I'm getting ready to start the initial setup and testing.
I'll be following this video https://www.youtube.com/watch?v=Akmw8ak ... e=youtu.be step-by-step.

Orin
Am I reading correctly that your CPU benchmark is 1332? I'm curious to know how it does. Since the minimum benchmark required is 1500....
Keep us posted.
Marty
"Jack of all trades, master of none!"
Mesa, AZ

762x51
Posts: 118
Joined: Wed Aug 02, 2017 8:40 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
System Serial Number: B0D5CC56DD75-0605170063 , 985DAD4295CF-0928170127 , 38D2694E4703-1222170401
Location: Near Guilford College, Greensboro, NC
Contact:

Re: Touch Screen Monitors

Post by 762x51 » Tue Aug 15, 2017 9:14 pm

Hi Marty,

The benchmark for the i3-6100U (in the PC I bought) is 3871 which is well past Centroid's requirement and the newer version, i3-7100U, is 3845 which is 26 less than the older version. See why I decided to save a couple of hundred and get the older version that is on sale?

Here is the web site where you can find the benchmark for almost any processor: https://www.cpubenchmark.net/

Orin

762x51
Posts: 118
Joined: Wed Aug 02, 2017 8:40 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
System Serial Number: B0D5CC56DD75-0605170063 , 985DAD4295CF-0928170127 , 38D2694E4703-1222170401
Location: Near Guilford College, Greensboro, NC
Contact:

Re: Touch Screen Monitors

Post by 762x51 » Wed Aug 16, 2017 2:12 am

Messed up again - :oops:

I just noticed that Centroid requires a single thread benchmark of 1500 and the i3-6100U benchmark is 1332 - Darn!!
Good thing Office Depot has a 14 day return policy as the PC I bought doesn't meet the requirements.

Back to the "drawing board".....

cnckeith
Posts: 605
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
System Serial Number: none
Contact:

Re: Touch Screen Monitors

Post by cnckeith » Wed Aug 16, 2017 9:01 am

here is link the latest Acorn quick start guide with win10 configuration, power hookup and cnc12 install instructions.
http://www.centroidcnc.com/centroid_diy ... guide.html

martyscncgarage
Posts: 954
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No
System Serial Number: none
Location: Mesa, AZ

Re: Touch Screen Monitors & Virtual Control Panel

Post by martyscncgarage » Wed Sep 06, 2017 8:51 am

Keep in mind if you want to use Virtual control panel, you NEED a Wide Aspect Ration 16:9 (wide rectangular) touch screen monitor!
If it is a standard 4:3 (square) aspect ratio monitor, Virtual Control Panel will not show up on the display, even though its running.
Ya gotta get a WIDE SCREEN Touchscreen monitor to get full benefits of VCP! ;)
"Jack of all trades, master of none!"
Mesa, AZ

Roadstercycle
Posts: 18
Joined: Sun Dec 24, 2017 12:07 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
System Serial Number: none
Location: Southern California

Re: Touch Screen Monitors

Post by Roadstercycle » Wed Dec 27, 2017 1:05 am

Asus VT168H 15.6" LCD Touchscreen Monitor - 16:9 $158.99

At Office Max right now. Don't know how much longer.

https://www.officedepot.com/a/products/ ... n-Monitor/

bloomingtonmike
Posts: 91
Joined: Wed Sep 11, 2013 1:31 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No
System Serial Number: 0916130849

Re: Touch Screen Monitors

Post by bloomingtonmike » Wed Dec 27, 2017 2:41 pm

Planar PCT2235 22" Touch Screen Monitor with Helium Stand arrives here in a couple hours. 22" 16:9 1920x1080 $212.84 on Amazon.
Ill post up results here soon.

Image
Mikie in Bloomington IL

Post Reply

Who is online

Users browsing this forum: Chaz, DICKEYBIRD and 2 guests