confused about option

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
RGSparber
Posts: 150
Joined: Sat May 27, 2017 2:12 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 38D269533454-0111180523
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Phoenix, AZ
Contact:

confused about option

Post by RGSparber »

I see below: - Touch Screen Operator Control panel. <--- Does this mean it comes with a Touch Screen monitor?

Thanks,

Rick
______________________________
Use your own PC OR purchase a Centroid NUC CNCPC $799 (#11084)

Centroid Intel NUC CNCPC

- Preloaded with Windows 10 and pre-configured for CNC PC duty
- Preloaded Centroid CNC software Mill and Lathe
- G code Editor
- Intercon Conversational
- Stock PLC programs
- Touch Screen Operator Control panel. <---
- Intel I3 processor, 4GB ram, SSD (solid state drive)
- Display port, HDMI, Ethernet, USB
- Centroid tested and pre qualified to work with Centroid CNC controllers
RGSparber
Posts: 150
Joined: Sat May 27, 2017 2:12 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 38D269533454-0111180523
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Phoenix, AZ
Contact:

Re: confused about option

Post by RGSparber »

Sorry, but my confusion continues. I found these two products. The one recommended for the Acorn is $799 which is the same price as just the NUC sold by Centroid. Is that right?

the other offering looks very similar but costs $401 more.

Thanks,

Rick

http://www.centroidcnc.com/centroid_diy ... nents.html

Centroid all-in-one Touch Screen CNCPC ready to go : $799 (#12786)

- Preloaded with Windows 10 and pre-configured for CNC PC duty
- Preloaded Centroid CNC software with G code Editor,
Intercon, Stock PLC programs, Acorn Install Wizard, Touch Screen
Operator Control panel.
- 19.5" Touch Screen,4 GB ram, I3 processor
- Wifi, Ethernet, webcam with mic, card reader, usb ports
- Powercord, Keyboard, Mouse
- Centroid tested and pre qualified to work with Centroid CNC controllers
- Compatible with Acorn, Oak, and Allin1DC

___________________________________________

http://www.centroidcnc.com/centroid_diy ... oller.html

Centroid all-in-one Touch Screen CNCPC ready to go $1200 (#11084tb)

- Preloaded with Windows 10 and pre-configured for CNC PC duty
- Preloaded "Centroid Free CNC" software with G code Editor, Intercon, Stock PLC programs, Acorn Install Wizard, Touch Screen Operator Control panel.

Plug in the Acorn board, run the Acorn Wizard and you are good to go.
Centroid_Liviu
Posts: 428
Joined: Mon Jul 18, 2011 9:57 am
Allin1DC CNC Controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes

Re: confused about option

Post by Centroid_Liviu »

- Touch Screen Operator Control panel. <--- Is the software option in CNC12 that allows a Touch Screen Control Panel to be used. You can touch your screen to jog, estop, etc. Just like a physical control pendant, but without the cost. A touch screen monitor is required for this.

Either the ALLIN1PC or the NUC PC will work if you want a computer option from us. We are currently updating the website and prices, some pages might show differences. Its the same item though.
When requesting support READ THIS POST first. https://www.viewtopic.php?f=60&t=1043

Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.

(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Post Reply