Motherboard
https://www.newegg.com/Product/Product. ... 85V4M10171 <-- broken link
All other links worked fine.
Do you have an update?
Thanks,
Rick
PS: minor typo: pats list should be parts list
A problem with PC order list
Moderator: cnckeith
-
- Posts: 431
- Joined: Mon Jul 18, 2011 9:57 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: A problem with PC order list
It looks like that motherboard is no longer available. We have switched over to using NUC PCs internally, but if you want to put together a desktop the below would be a good suggestion.
Motherboard:
https://www.newegg.com/Product/Product. ... 6813145010
CPU:
https://www.newegg.com/Product/Product. ... 6819117748
RAM:
https://www.newegg.com/Product/Product. ... 6820156108
Motherboard:
https://www.newegg.com/Product/Product. ... 6813145010
CPU:
https://www.newegg.com/Product/Product. ... 6819117748
RAM:
https://www.newegg.com/Product/Product. ... 6820156108
When requesting support READ THIS POST first. https://www.viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
-
- Posts: 7327
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: A problem with PC order list
hello. I just updated the CNCPC requirements web page with the latest CNCPC information.
http://www.centroidcnc.com/cnc_pc_perfo ... ments.html
http://www.centroidcnc.com/cnc_pc_perfo ... ments.html
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 150
- Joined: Sat May 27, 2017 2:12 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 38D269533454-0111180523
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Phoenix, AZ
- Contact:
Re: A problem with PC order list
I stumbled into another problem:
The CPU link took me to
Intel G3930 Kaby Lake Dual-Core 2.9 GHz LGA 1151 51W BX80677G3930 Desktop Processor Intel HD Graphics 610
yet the paragraph above said
1.) The PC CPU must have a SINGLE CORE minimum benchmark of 1500. You can look up a CPU’s benchmark # using this website.
Please advise.
Thanks,
Rick
The CPU link took me to
Intel G3930 Kaby Lake Dual-Core 2.9 GHz LGA 1151 51W BX80677G3930 Desktop Processor Intel HD Graphics 610
yet the paragraph above said
1.) The PC CPU must have a SINGLE CORE minimum benchmark of 1500. You can look up a CPU’s benchmark # using this website.
Please advise.
Thanks,
Rick
-
- Posts: 431
- Joined: Mon Jul 18, 2011 9:57 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: A problem with PC order list
Each "core" of the CPU needs to be above the minimum benchmark. All CPUs these days have at least two cores. There are CPUs with multiple cores but the cores are not above the minimum.
When requesting support READ THIS POST first. https://www.viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
-
- Posts: 150
- Joined: Sat May 27, 2017 2:12 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 38D269533454-0111180523
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Phoenix, AZ
- Contact:
Re: A problem with PC order list
So you mean:
1.) The PC CPU must have at least one of its cores with a minimum benchmark of 1500. You can look up a CPU’s benchmark # using this website. ?
Rick
1.) The PC CPU must have at least one of its cores with a minimum benchmark of 1500. You can look up a CPU’s benchmark # using this website. ?
Rick
-
- Posts: 431
- Joined: Mon Jul 18, 2011 9:57 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: A problem with PC order list
All cores will be the same nominal speed. The reason we go by single core speed is that manufactures often create complex scenarios on how multiple cores work together based on system settings and software being used. But in real life two cores that are 2GHz each don't make a 4GHz processor for instance.
When requesting support READ THIS POST first. https://www.viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: A problem with PC order list
You got your question ordered but yes, your G3930 meets the CPU requirements and that's what countsRGSparber wrote: ↑Wed Aug 02, 2017 7:23 pm I stumbled into another problem:
The CPU link took me to
Intel G3930 Kaby Lake Dual-Core 2.9 GHz LGA 1151 51W BX80677G3930 Desktop Processor Intel HD Graphics 610
yet the paragraph above said
1.) The PC CPU must have a SINGLE CORE minimum benchmark of 1500. You can look up a CPU’s benchmark # using this website.
Please advise.
Thanks,
Rick
CPU benchmark of over 1500
4meg memory
Solid State Disk drive strongly recommended, about 120GB works great.
Welcome to the Acorn Club Rick!
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ