I have and All in one DC on a supermax 40 , on trying to start I get after timeout after initializing MPU then "MPU11 not responding ".
LED window on MPU has no numbers , just a horizontal line at the top ?
MPU11 not responding
Moderator: cnckeith
-
- Posts: 286
- Joined: Thu Mar 18, 2010 2:24 pm
Re: MPU11 not responding
Please follow the attached tech bulletin to see if that helps resolve your issue.
- Attachments
-
- 279 Error Initializing MPU11.pdf
- (282.64 KiB) Downloaded 123 times
When requesting support, please ALWAYS post a current report. Find out how to take a report from your Acorn, CNC11 or CNC10 system here: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
If your question is PLC, Macro or program related, please also post a copy of the program or macro as well.
Without the above information we may not be able to help and/or reply until the required information is posted..
If your question is PLC, Macro or program related, please also post a copy of the program or macro as well.
Without the above information we may not be able to help and/or reply until the required information is posted..