I currently am running version 632. The latest version on the website here is 734.
So is there an easy path to upgrade without having to redo all the settings, parameters, etc? In other words, if I run the setup for the new version does it transfer all the settings/parameters over to the new version?
Upgrading CNC11 Software
Moderator: cnckeith
-
- Posts: 231
- Joined: Mon Feb 07, 2011 8:03 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 1030090103
- DC3IOB: Yes
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: No
- Location: Montvale, NJ
-
- Posts: 431
- Joined: Mon Jul 18, 2011 9:57 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: Upgrading CNC11 Software
As long as you don't install a PLC program you will not overwrite your old settings. I suggest making a report beforehand either way, Press F7 Utilities, than F7 Report. Selected where you want to save the report. After you are done installing the updated software and are happy with your configuration, make another report and put it in a safe place. If something happens to your computer down the road you can just install the software on another PC, load the report, and be back up an running right away.
When requesting support READ THIS POST first. https://www.viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)