Messages during ALLIN1DC Bench Test

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
Jay
Posts: 33
Joined: Tue May 17, 2011 2:30 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: A900438
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: No
Location: Regina, Sask

Messages during ALLIN1DC Bench Test

Post by Jay »

Hi Gang!
I'm just starting the Bench Test of the AllIN1DC - going through the paces and getting a couple of messages along the way:

The first one: 5161 Unconfigured Mini PLC 1 Found
I have a PLCADD1616 in the mix so not sure it that's generating the message, or if the message is part of the normal process


The second: (going from memory) - Invalid Tool Library / Offset library File
Again I haven't done any trouble shooting yet to see if the files are there, or if they're created later when I define a tool and an offset, or if it's just a Windows permission thing.

Thanks
Jay
Okotoks, Alberta
cncsnw
Posts: 3763
Joined: Wed Mar 24, 2010 5:48 pm

Re: Messages during ALLIN1DC Bench Test

Post by cncsnw »

Set Machine Parameter 900 = 1 to tell the software to expect your PLCADD1616 board.

The messages regarding tool and offset libraries will go away once you have gone to those screens and pressed F10/Save for the first time. Likewise, if you are getting a message about the WCS file, you can go to the Part Setup screen and set zero on any axis.
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: Messages during ALLIN1DC Bench Test

Post by martyscncgarage »

Jay wrote: Sun Jul 16, 2017 7:21 pm Hi Gang!
I'm just starting the Bench Test of the AllIN1DC - going through the paces and getting a couple of messages along the way:

The first one: 5161 Unconfigured Mini PLC 1 Found
I have a PLCADD1616 in the mix so not sure it that's generating the message, or if the message is part of the normal process


The second: (going from memory) - Invalid Tool Library / Offset library File
Again I haven't done any trouble shooting yet to see if the files are there, or if they're created later when I define a tool and an offset, or if it's just a Windows permission thing.

Thanks
Jay
Keep us posted on your progress! We're interested to see how you make out.
What machine are you upgrading? Pictures?
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Jay
Posts: 33
Joined: Tue May 17, 2011 2:30 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: A900438
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: No
Location: Regina, Sask

Re: Messages during ALLIN1DC Bench Test

Post by Jay »

cncsnw wrote: Sun Jul 16, 2017 11:30 pm Set Machine Parameter 900 = 1 to tell the software to expect your PLCADD1616 board.
...
Awesome! thanks

I've taken pictures along the way as I've cleaned up this old Bridgeport, and will post them shortly.

Jay
Okotoks, Alberta
Jay
Posts: 33
Joined: Tue May 17, 2011 2:30 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: A900438
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: No
Location: Regina, Sask

Re: Messages during ALLIN1DC Bench Test

Post by Jay »

Hi Gang - I've posted pictures of the build in the Success stories section of this forum - so far enjoying the work!
Okotoks, Alberta
Post Reply