Wizard will not allow All-Limits - PLC compile error

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
jj80909
Posts: 19
Joined: Sun Feb 11, 2018 1:39 pm
Acorn CNC Controller: No
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: No
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

Wizard will not allow All-Limits - PLC compile error

Post by jj80909 »

I started working on my configuration with the the Acorn Wizard and found that if I select All-Limits for any of the 8 inputs, it will result in a PLC compile error. I am able to configure any of the 8 input to use as All-Homes.

Could this be a bug in the wizard?

Top
cnckeith
Site Admin
Posts: 9047
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: Yes
Hickory CNC Controller: No
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:
Contact cnckeith

Re: Wizard will not allow All-Limits - PLC compile error

Post by cnckeith »

yes, its been covered here on the forum elsewhere,
use homeall and software travel limits, that works.
v4.14 will have the limitall fix.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63

Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html

Top
Post Reply

Return to “Centroid Acorn CNC Controller”