Bridgeport mill 9 x42

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
HobbieZones.com
Posts: 1
Joined: Tue May 17, 2011 3:10 pm
Allin1DC CNC Controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

Bridgeport mill 9 x42

Post by HobbieZones.com »

Hi looking at putting cnc controls on a 1978 Bridgeport mill table is 9x42.

Would not need the pc or lcd have spare one.

Looking at the Digitizing option that would be so handy. Also can it be added later on ?

Mill would need ball screws.

Just what would it take $$ to make this happen.

Most of the time cutting Alum or Steel.

Link to some parts made in past on Mill/Drill http://www.hobbiezones.com/page14.php

Also would anyone in the Iowa area have one to look at ?

Thank you
Post Reply