Centroid CNC12, CNC11 & CNC10 Manuals
Moderator: cnckeith
Centroid CNC12, CNC11 & CNC10 Manuals
updated by cnckeith 6-17-19
CNC12 Operators Manuals
CNC12 Centroid Operators Manuals
https://www.centroidcnc.com/centroid_di ... nuals.html
newbie Centroid PLC programming video series..
https://www.youtube.com/watch?v=7WiEJiQ ... i2WKIedQlQ
How to add a simple safety switch input to a PLC program
https://www.centroidcnc.com/dealersuppo ... ds/314.pdf
CNC12 PLC programming manual http://www.centroidcnc.com/centroid_diy ... manual.pdf
PLC Detective users guide.
https://www.centroidcnc.com/downloads/c ... kstart.pdf
MPU11/CNC11 Centroid Operators Manuals:
CNC11 v3.16 Mill Operators Manual
CNC11 v3.16 Lathe Operators Manual
CNC11 Windows 10 Setup Video:
https://youtu.be/Akmw8ak_TlM
CNC11 PLC Programming Manual:
http://www.centroidcnc.com/dealersuppor ... Manual.pdf
CNC12 Operators Manuals
CNC12 Centroid Operators Manuals
https://www.centroidcnc.com/centroid_di ... nuals.html
newbie Centroid PLC programming video series..
https://www.youtube.com/watch?v=7WiEJiQ ... i2WKIedQlQ
How to add a simple safety switch input to a PLC program
https://www.centroidcnc.com/dealersuppo ... ds/314.pdf
CNC12 PLC programming manual http://www.centroidcnc.com/centroid_diy ... manual.pdf
PLC Detective users guide.
https://www.centroidcnc.com/downloads/c ... kstart.pdf
MPU11/CNC11 Centroid Operators Manuals:
CNC11 v3.16 Mill Operators Manual
CNC11 v3.16 Lathe Operators Manual
CNC11 Windows 10 Setup Video:
https://youtu.be/Akmw8ak_TlM
CNC11 PLC Programming Manual:
http://www.centroidcnc.com/dealersuppor ... Manual.pdf
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
Centroid CNC11 Install Manuals - MPU11 systems
ALLIN1DC
centroid CNC11 ALLIN1DC Install Manual
http://www.centroidcnc.com/downloads/ce ... manual.pdf
Oak:
centroid Oak Centroid CNC11 Installation manual
http://www.centroidcnc.com/downloads/ce ... manual.pdf
MPU11/GPIO4D:
centroid MPU11/GPIO4D Centroid CNC11 Installation manual
http://www.centroidcnc.com/downloads/MP ... Manual.pdf
DC3IOB:
centroid MPU11/DC3IOB Centroid CNC11 Installation Manual
http://www.ajaxcnc.com/tech/downloads/m ... nstall.pdf
centroid CNC11 ALLIN1DC Install Manual
http://www.centroidcnc.com/downloads/ce ... manual.pdf
Oak:
centroid Oak Centroid CNC11 Installation manual
http://www.centroidcnc.com/downloads/ce ... manual.pdf
MPU11/GPIO4D:
centroid MPU11/GPIO4D Centroid CNC11 Installation manual
http://www.centroidcnc.com/downloads/MP ... Manual.pdf
DC3IOB:
centroid MPU11/DC3IOB Centroid CNC11 Installation Manual
http://www.ajaxcnc.com/tech/downloads/m ... nstall.pdf
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 114
- Joined: Wed Sep 11, 2013 1:31 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 0916130849
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
Re: Circuit Board Manuals, Install Manuals, Operator Manuals
Centroid Rotary Table - RT-150
- Attachments
-
- RT-150_100111.pdf
- (1.3 MiB) Downloaded 1557 times
Mikie in Bloomington IL
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 7901
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Circuit Board Manuals, Install Manuals, Operator Manuals
fyi.. all the latest Oak and ALlin1DC system schematic sets, installation and operator manuals are here.
http://www.centroidcnc.com/operator_manual.html
http://www.centroidcnc.com/operator_manual.html
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 3267
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: Circuit Board Manuals, Install Manuals, Operator Manuals
Is there an OAK velocity mode install manual like the one for the MPU11/GPIO4D?
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 7901
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Circuit Board Manuals, Install Manuals, Operator Manuals
yes..found on this page..http://www.centroidcnc.com/operator_manual.html
check out the oak schematics as well on same page
check out the oak schematics as well on same page
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 3267
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: Centroid CNC11 & CNC10 Operator Manuals
I keep most of my manuals on a tablet for reference and it's a lot easier to navigate if they have TOCs and hyperlinks. So, I went through the CNC11 lathe manual and added those. [strike]Still working on the Mill manual (although I have an older 3.14 version with links if anyone is interested.)[/strike]
{EDIT} TOC and Links added to 3.16 Mill manual attached
{EDIT} TOC and Links added to 3.16 Mill manual attached
- Attachments
-
- centroid-cnc11-v316-MillManual.pdf
- (14.34 MiB) Downloaded 636 times
-
- centroid-cnc11-v316-LatheManual.pdf
- (10.55 MiB) Downloaded 543 times
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
Re: Centroid CNC11 & CNC10 Operator Manuals
Tom,
Thank you for the effort on this. The manual files are much nicer that way.
What software tool did you use to add the TOC and links?
Thank you for the effort on this. The manual files are much nicer that way.
What software tool did you use to add the TOC and links?
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 3267
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: Centroid CNC11 & CNC10 Operator Manuals
Marc,
I used AutoBookmark from Evermap.
https://www.evermap.com/autobookmark.asp
It makes it easier, but still a lot of work.
I used AutoBookmark from Evermap.
https://www.evermap.com/autobookmark.asp
It makes it easier, but still a lot of work.
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 72
- Joined: Wed Sep 27, 2017 3:07 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
- Location: The Netherlands
Re: Centroid CNC11 & CNC10 Operator Manuals
Just saw this topic, and downloaded the milling manual with bookmarks.
Maybe you should post this also in the Acorn section, I expect many more Acorn users appreciate the bookmarks.
This makes searching the manual so much easier
Maybe you should post this also in the Acorn section, I expect many more Acorn users appreciate the bookmarks.
This makes searching the manual so much easier
(Note: Liking will "up vote" a post in the search results helping others find good information faster)