CNC12 V5.09 beta REV5 is now available for testing.
Posted: Fri Mar 01, 2024 3:36 pm
update. 4-5-24 RC#4 is here. https://centroidcncforum.com/viewtopic.php?f=67&t=9997
CNC12 V5.09 beta REV5 is now available for testing.
Release notes: How to install beta software.
1.) make a back up of your existing cncm or cnct folder.
2.) create a fresh report.zip file with your existing cnc12 installation
3.) if acorn or acornsix open the wizard of your existing cnc12 installation and press <CTRL P> (CTRL key and the P key at the same time) and save as PDF to the desktop.
4.) download beta software, double click on installer .exe and install CNC12 https://centroid-support.filemail.com/d/ffztrdntuusuruy
5.) If Allin1DC, Oak or Hickory Choose a Centroid provided PLC program that matches your system ( If you do have a custom PLC program, install one of the Centroid provided PLC programs and edit it with your customizations) and then update any parameter values if necessary to match new or updated features of the new version of CNC12.
6.) If Acorn or AcornSix, open CNC12 and then the Wizard and hand enter the data from the PDF made in step 3.
7.) copy over any tool libraries, WCS locations, g code files, custom macros.
8.) edit the beta VCP with any custom buttons if you like. don't copy over an old VCP to the beta software, always start with a Centroid provided VCP skin and edit it with your custom changes.
detailed CNC12 install instructions are here.
https://www.centroidcnc.com/centroid_di ... ctions.pdf
Known issues with Rev 5
1.) Run time graphics tool indicator artifacts may appear with rotary jobs, work around is to press "trail on" "trail off" to clear them.
2.) Rotary G code backplot with CSR active does not display properly, work around, don't use CSR with rotary g code backplotting
CNC12 V5.09 beta REV5 is now available for testing.
Release notes: How to install beta software.
1.) make a back up of your existing cncm or cnct folder.
2.) create a fresh report.zip file with your existing cnc12 installation
3.) if acorn or acornsix open the wizard of your existing cnc12 installation and press <CTRL P> (CTRL key and the P key at the same time) and save as PDF to the desktop.
4.) download beta software, double click on installer .exe and install CNC12 https://centroid-support.filemail.com/d/ffztrdntuusuruy
5.) If Allin1DC, Oak or Hickory Choose a Centroid provided PLC program that matches your system ( If you do have a custom PLC program, install one of the Centroid provided PLC programs and edit it with your customizations) and then update any parameter values if necessary to match new or updated features of the new version of CNC12.
6.) If Acorn or AcornSix, open CNC12 and then the Wizard and hand enter the data from the PDF made in step 3.
7.) copy over any tool libraries, WCS locations, g code files, custom macros.
8.) edit the beta VCP with any custom buttons if you like. don't copy over an old VCP to the beta software, always start with a Centroid provided VCP skin and edit it with your custom changes.
detailed CNC12 install instructions are here.
https://www.centroidcnc.com/centroid_di ... ctions.pdf
Known issues with Rev 5
1.) Run time graphics tool indicator artifacts may appear with rotary jobs, work around is to press "trail on" "trail off" to clear them.
2.) Rotary G code backplot with CSR active does not display properly, work around, don't use CSR with rotary g code backplotting