Hello,
I am french and i've just discovered this forum.
I want to retrofit my Koike Monograph Millenium with a new CNC and New stepmotors.
Someone can help me to choose the good products?
Best regards
Didier
Retrofit Koike Monograph
-
- Posts: 2
- Joined: Sat Apr 08, 2023 2:13 am
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: No
- CNC11: No
- CPU10 or CPU7: No
-
- Posts: 528
- Joined: Tue Aug 17, 2021 10:51 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Retrofit Koike Monograph
Hello Didier welcome
Can you post some pictures of the table? It would be easiest if you start a Google photos album. Pictures are easier and clearer to view in a Google album also.
Take pictures of the axis motors locations on the table and any mechanical parts that are used to move each axis.
What type of plasma cutter do you have?
Are you looking for the best money can buy for your motors or medium level equipment that gets the job done ?
I've never looked at a monograph brand table so I'm eager to check out what you have! Thanks for sharing!
Can you post some pictures of the table? It would be easiest if you start a Google photos album. Pictures are easier and clearer to view in a Google album also.
Take pictures of the axis motors locations on the table and any mechanical parts that are used to move each axis.
What type of plasma cutter do you have?
Are you looking for the best money can buy for your motors or medium level equipment that gets the job done ?
I've never looked at a monograph brand table so I'm eager to check out what you have! Thanks for sharing!
-
- Posts: 2
- Joined: Sat Apr 08, 2023 2:13 am
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: No
- CNC11: No
- CPU10 or CPU7: No
Re: Retrofit Koike Monograph
Hi Joe,
I have no photo of my table but I have the last documentation in pdf file.
Nowaday, the cnc runs on win XP!
And recently, the z-axis breaks down. I bought a new stepper motor but it doesn't work.
I prefer retrofit than repair because it's diffiult to find spares parts now.
I would like a touch screen and a solid pc on this cnc.
Thanks for your help.
I have no photo of my table but I have the last documentation in pdf file.
Nowaday, the cnc runs on win XP!
And recently, the z-axis breaks down. I bought a new stepper motor but it doesn't work.
I prefer retrofit than repair because it's diffiult to find spares parts now.
I would like a touch screen and a solid pc on this cnc.
Thanks for your help.
- Attachments
-
- MONOGRAPH MILLENNIUM CUTTER II mi0556a.pdf
- (2.27 MiB) Downloaded 16 times