Can anyone explain the process of adding scribe to the toolpaths? I don't see an option besides plate marker in sheetcam, but it just uses m61/62. Maybe an updated post I'm not finding?
Thanks!
Dylan
Scribe Sheetcam post processor
-
Joey
- Posts: 522
- Joined: Tue Aug 17, 2021 10:51 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Scribe Sheetcam post processor
I do not think that is included in the Post. I'll see what less/sheetcam thinks we can do.
-
BoenBuilt
- Posts: 30
- Joined: Wed Feb 08, 2023 4:11 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Scribe Sheetcam post processor
That would be awesome.
What does the workflow look like, if I use Fusion and sheetcam now, to add some scribing to the parts? Vectric? Seems like a lot $$ for something so simple.
What does the workflow look like, if I use Fusion and sheetcam now, to add some scribing to the parts? Vectric? Seems like a lot $$ for something so simple.
-
Joey
- Posts: 522
- Joined: Tue Aug 17, 2021 10:51 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Scribe Sheetcam post processor
Dylan.
Here is an updated Post for scribe with Sheetcam. Plate marker will now use M39 for scribe on and M40 for scribe off.
Let me know what you think
Here is an updated Post for scribe with Sheetcam. Plate marker will now use M39 for scribe on and M40 for scribe off.
Let me know what you think
- Attachments
-
- centroid_plasma_thc_sheetcam with feed.scpost.txt
- (3.76 KiB) Downloaded 38 times